linux-headers (unknown)
1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 /*
3 * Generic RTC interface.
4 * This version contains the part of the user interface to the Real Time Clock
5 * service. It is used with both the legacy mc146818 and also EFI
6 * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
7 * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
8 *
9 * Copyright (C) 1999 Hewlett-Packard Co.
10 * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
11 */
12 #ifndef _LINUX_RTC_H_
13 #define _LINUX_RTC_H_
14
15 #include <linux/const.h>
16 #include <linux/ioctl.h>
17 #include <linux/types.h>
18
19 /*
20 * The struct used to pass data via the following ioctl. Similar to the
21 * struct tm in <time.h>, but it needs to be here so that the kernel
22 * source is self contained, allowing cross-compiles, etc. etc.
23 */
24
25 struct rtc_time {
26 int tm_sec;
27 int tm_min;
28 int tm_hour;
29 int tm_mday;
30 int tm_mon;
31 int tm_year;
32 int tm_wday;
33 int tm_yday;
34 int tm_isdst;
35 };
36
37 /*
38 * This data structure is inspired by the EFI (v0.92) wakeup
39 * alarm API.
40 */
41 struct rtc_wkalrm {
42 unsigned char enabled; /* 0 = alarm disabled, 1 = alarm enabled */
43 unsigned char pending; /* 0 = alarm not pending, 1 = alarm pending */
44 struct rtc_time time; /* time the alarm is set to */
45 };
46
47 /*
48 * Data structure to control PLL correction some better RTC feature
49 * pll_value is used to get or set current value of correction,
50 * the rest of the struct is used to query HW capabilities.
51 * This is modeled after the RTC used in Q40/Q60 computers but
52 * should be sufficiently flexible for other devices
53 *
54 * +ve pll_value means clock will run faster by
55 * pll_value*pll_posmult/pll_clock
56 * -ve pll_value means clock will run slower by
57 * pll_value*pll_negmult/pll_clock
58 */
59
60 struct rtc_pll_info {
61 int pll_ctrl; /* placeholder for fancier control */
62 int pll_value; /* get/set correction value */
63 int pll_max; /* max +ve (faster) adjustment value */
64 int pll_min; /* max -ve (slower) adjustment value */
65 int pll_posmult; /* factor for +ve correction */
66 int pll_negmult; /* factor for -ve correction */
67 long pll_clock; /* base PLL frequency */
68 };
69
70 struct rtc_param {
71 __u64 param;
72 union {
73 __u64 uvalue;
74 __s64 svalue;
75 __u64 ptr;
76 };
77 __u32 index;
78 __u32 __pad;
79 };
80
81 /*
82 * ioctl calls that are permitted to the /dev/rtc interface, if
83 * any of the RTC drivers are enabled.
84 */
85
86 #define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */
87 #define RTC_AIE_OFF _IO('p', 0x02) /* ... off */
88 #define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */
89 #define RTC_UIE_OFF _IO('p', 0x04) /* ... off */
90 #define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */
91 #define RTC_PIE_OFF _IO('p', 0x06) /* ... off */
92 #define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */
93 #define RTC_WIE_OFF _IO('p', 0x10) /* ... off */
94
95 #define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */
96 #define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */
97 #define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */
98 #define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */
99 #define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */
100 #define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */
101 #define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */
102 #define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */
103
104 #define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
105 #define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
106
107 #define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
108 #define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
109
110 #define RTC_PARAM_GET _IOW('p', 0x13, struct rtc_param) /* Get parameter */
111 #define RTC_PARAM_SET _IOW('p', 0x14, struct rtc_param) /* Set parameter */
112
113 #define RTC_VL_DATA_INVALID _BITUL(0) /* Voltage too low, RTC data is invalid */
114 #define RTC_VL_BACKUP_LOW _BITUL(1) /* Backup voltage is low */
115 #define RTC_VL_BACKUP_EMPTY _BITUL(2) /* Backup empty or not present */
116 #define RTC_VL_ACCURACY_LOW _BITUL(3) /* Voltage is low, RTC accuracy is reduced */
117 #define RTC_VL_BACKUP_SWITCH _BITUL(4) /* Backup switchover happened */
118
119 #define RTC_VL_READ _IOR('p', 0x13, unsigned int) /* Voltage low detection */
120 #define RTC_VL_CLR _IO('p', 0x14) /* Clear voltage low information */
121
122 /* interrupt flags */
123 #define RTC_IRQF 0x80 /* Any of the following is active */
124 #define RTC_PF 0x40 /* Periodic interrupt */
125 #define RTC_AF 0x20 /* Alarm interrupt */
126 #define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */
127
128 /* feature list */
129 #define RTC_FEATURE_ALARM 0
130 #define RTC_FEATURE_ALARM_RES_MINUTE 1
131 #define RTC_FEATURE_NEED_WEEK_DAY 2
132 #define RTC_FEATURE_ALARM_RES_2S 3
133 #define RTC_FEATURE_UPDATE_INTERRUPT 4
134 #define RTC_FEATURE_CORRECTION 5
135 #define RTC_FEATURE_BACKUP_SWITCH_MODE 6
136 #define RTC_FEATURE_ALARM_WAKEUP_ONLY 7
137 #define RTC_FEATURE_CNT 8
138
139 /* parameter list */
140 #define RTC_PARAM_FEATURES 0
141 #define RTC_PARAM_CORRECTION 1
142 #define RTC_PARAM_BACKUP_SWITCH_MODE 2
143
144 #define RTC_BSM_DISABLED 0
145 #define RTC_BSM_DIRECT 1
146 #define RTC_BSM_LEVEL 2
147 #define RTC_BSM_STANDBY 3
148
149 #define RTC_MAX_FREQ 8192
150
151
152 #endif /* _LINUX_RTC_H_ */
Browse
Usage
Versions