linux-headers (unknown)
1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 #ifndef __GENWQE_CARD_H__
3 #define __GENWQE_CARD_H__
4
5 /**
6 * IBM Accelerator Family 'GenWQE'
7 *
8 * (C) Copyright IBM Corp. 2013
9 *
10 * Author: Frank Haverkamp <haver@linux.vnet.ibm.com>
11 * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
12 * Author: Michael Jung <mijung@gmx.net>
13 * Author: Michael Ruettger <michael@ibmra.de>
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License (version 2 only)
17 * as published by the Free Software Foundation.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 */
24
25 /*
26 * User-space API for the GenWQE card. For debugging and test purposes
27 * the register addresses are included here too.
28 */
29
30 #include <linux/types.h>
31 #include <linux/ioctl.h>
32
33 /* Basename of sysfs, debugfs and /dev interfaces */
34 #define GENWQE_DEVNAME "genwqe"
35
36 #define GENWQE_TYPE_ALTERA_230 0x00 /* GenWQE4 Stratix-IV-230 */
37 #define GENWQE_TYPE_ALTERA_530 0x01 /* GenWQE4 Stratix-IV-530 */
38 #define GENWQE_TYPE_ALTERA_A4 0x02 /* GenWQE5 A4 Stratix-V-A4 */
39 #define GENWQE_TYPE_ALTERA_A7 0x03 /* GenWQE5 A7 Stratix-V-A7 */
40
41 /* MMIO Unit offsets: Each UnitID occupies a defined address range */
42 #define GENWQE_UID_OFFS(uid) ((uid) << 24)
43 #define GENWQE_SLU_OFFS GENWQE_UID_OFFS(0)
44 #define GENWQE_HSU_OFFS GENWQE_UID_OFFS(1)
45 #define GENWQE_APP_OFFS GENWQE_UID_OFFS(2)
46 #define GENWQE_MAX_UNITS 3
47
48 /* Common offsets per UnitID */
49 #define IO_EXTENDED_ERROR_POINTER 0x00000048
50 #define IO_ERROR_INJECT_SELECTOR 0x00000060
51 #define IO_EXTENDED_DIAG_SELECTOR 0x00000070
52 #define IO_EXTENDED_DIAG_READ_MBX 0x00000078
53 #define IO_EXTENDED_DIAG_MAP(ring) (0x00000500 | ((ring) << 3))
54
55 #define GENWQE_EXTENDED_DIAG_SELECTOR(ring, trace) (((ring) << 8) | (trace))
56
57 /* UnitID 0: Service Layer Unit (SLU) */
58
59 /* SLU: Unit Configuration Register */
60 #define IO_SLU_UNITCFG 0x00000000
61 #define IO_SLU_UNITCFG_TYPE_MASK 0x000000000ff00000 /* 27:20 */
62
63 /* SLU: Fault Isolation Register (FIR) (ac_slu_fir) */
64 #define IO_SLU_FIR 0x00000008 /* read only, wr direct */
65 #define IO_SLU_FIR_CLR 0x00000010 /* read and clear */
66
67 /* SLU: First Error Capture Register (FEC/WOF) */
68 #define IO_SLU_FEC 0x00000018
69
70 #define IO_SLU_ERR_ACT_MASK 0x00000020
71 #define IO_SLU_ERR_ATTN_MASK 0x00000028
72 #define IO_SLU_FIRX1_ACT_MASK 0x00000030
73 #define IO_SLU_FIRX0_ACT_MASK 0x00000038
74 #define IO_SLU_SEC_LEM_DEBUG_OVR 0x00000040
75 #define IO_SLU_EXTENDED_ERR_PTR 0x00000048
76 #define IO_SLU_COMMON_CONFIG 0x00000060
77
78 #define IO_SLU_FLASH_FIR 0x00000108
79 #define IO_SLU_SLC_FIR 0x00000110
80 #define IO_SLU_RIU_TRAP 0x00000280
81 #define IO_SLU_FLASH_FEC 0x00000308
82 #define IO_SLU_SLC_FEC 0x00000310
83
84 /*
85 * The Virtual Function's Access is from offset 0x00010000
86 * The Physical Function's Access is from offset 0x00050000
87 * Single Shared Registers exists only at offset 0x00060000
88 *
89 * SLC: Queue Virtual Window Window for accessing into a specific VF
90 * queue. When accessing the 0x10000 space using the 0x50000 address
91 * segment, the value indicated here is used to specify which VF
92 * register is decoded. This register, and the 0x50000 register space
93 * can only be accessed by the PF. Example, if this register is set to
94 * 0x2, then a read from 0x50000 is the same as a read from 0x10000
95 * from VF=2.
96 */
97
98 /* SLC: Queue Segment */
99 #define IO_SLC_QUEUE_SEGMENT 0x00010000
100 #define IO_SLC_VF_QUEUE_SEGMENT 0x00050000
101
102 /* SLC: Queue Offset */
103 #define IO_SLC_QUEUE_OFFSET 0x00010008
104 #define IO_SLC_VF_QUEUE_OFFSET 0x00050008
105
106 /* SLC: Queue Configuration */
107 #define IO_SLC_QUEUE_CONFIG 0x00010010
108 #define IO_SLC_VF_QUEUE_CONFIG 0x00050010
109
110 /* SLC: Job Timout/Only accessible for the PF */
111 #define IO_SLC_APPJOB_TIMEOUT 0x00010018
112 #define IO_SLC_VF_APPJOB_TIMEOUT 0x00050018
113 #define TIMEOUT_250MS 0x0000000f
114 #define HEARTBEAT_DISABLE 0x0000ff00
115
116 /* SLC: Queue InitSequence Register */
117 #define IO_SLC_QUEUE_INITSQN 0x00010020
118 #define IO_SLC_VF_QUEUE_INITSQN 0x00050020
119
120 /* SLC: Queue Wrap */
121 #define IO_SLC_QUEUE_WRAP 0x00010028
122 #define IO_SLC_VF_QUEUE_WRAP 0x00050028
123
124 /* SLC: Queue Status */
125 #define IO_SLC_QUEUE_STATUS 0x00010100
126 #define IO_SLC_VF_QUEUE_STATUS 0x00050100
127
128 /* SLC: Queue Working Time */
129 #define IO_SLC_QUEUE_WTIME 0x00010030
130 #define IO_SLC_VF_QUEUE_WTIME 0x00050030
131
132 /* SLC: Queue Error Counts */
133 #define IO_SLC_QUEUE_ERRCNTS 0x00010038
134 #define IO_SLC_VF_QUEUE_ERRCNTS 0x00050038
135
136 /* SLC: Queue Loast Response Word */
137 #define IO_SLC_QUEUE_LRW 0x00010040
138 #define IO_SLC_VF_QUEUE_LRW 0x00050040
139
140 /* SLC: Freerunning Timer */
141 #define IO_SLC_FREE_RUNNING_TIMER 0x00010108
142 #define IO_SLC_VF_FREE_RUNNING_TIMER 0x00050108
143
144 /* SLC: Queue Virtual Access Region */
145 #define IO_PF_SLC_VIRTUAL_REGION 0x00050000
146
147 /* SLC: Queue Virtual Window */
148 #define IO_PF_SLC_VIRTUAL_WINDOW 0x00060000
149
150 /* SLC: DDCB Application Job Pending [n] (n=0:63) */
151 #define IO_PF_SLC_JOBPEND(n) (0x00061000 + 8*(n))
152 #define IO_SLC_JOBPEND(n) IO_PF_SLC_JOBPEND(n)
153
154 /* SLC: Parser Trap RAM [n] (n=0:31) */
155 #define IO_SLU_SLC_PARSE_TRAP(n) (0x00011000 + 8*(n))
156
157 /* SLC: Dispatcher Trap RAM [n] (n=0:31) */
158 #define IO_SLU_SLC_DISP_TRAP(n) (0x00011200 + 8*(n))
159
160 /* Global Fault Isolation Register (GFIR) */
161 #define IO_SLC_CFGREG_GFIR 0x00020000
162 #define GFIR_ERR_TRIGGER 0x0000ffff
163
164 /* SLU: Soft Reset Register */
165 #define IO_SLC_CFGREG_SOFTRESET 0x00020018
166
167 /* SLU: Misc Debug Register */
168 #define IO_SLC_MISC_DEBUG 0x00020060
169 #define IO_SLC_MISC_DEBUG_CLR 0x00020068
170 #define IO_SLC_MISC_DEBUG_SET 0x00020070
171
172 /* Temperature Sensor Reading */
173 #define IO_SLU_TEMPERATURE_SENSOR 0x00030000
174 #define IO_SLU_TEMPERATURE_CONFIG 0x00030008
175
176 /* Voltage Margining Control */
177 #define IO_SLU_VOLTAGE_CONTROL 0x00030080
178 #define IO_SLU_VOLTAGE_NOMINAL 0x00000000
179 #define IO_SLU_VOLTAGE_DOWN5 0x00000006
180 #define IO_SLU_VOLTAGE_UP5 0x00000007
181
182 /* Direct LED Control Register */
183 #define IO_SLU_LEDCONTROL 0x00030100
184
185 /* SLU: Flashbus Direct Access -A5 */
186 #define IO_SLU_FLASH_DIRECTACCESS 0x00040010
187
188 /* SLU: Flashbus Direct Access2 -A5 */
189 #define IO_SLU_FLASH_DIRECTACCESS2 0x00040020
190
191 /* SLU: Flashbus Command Interface -A5 */
192 #define IO_SLU_FLASH_CMDINTF 0x00040030
193
194 /* SLU: BitStream Loaded */
195 #define IO_SLU_BITSTREAM 0x00040040
196
197 /* This Register has a switch which will change the CAs to UR */
198 #define IO_HSU_ERR_BEHAVIOR 0x01001010
199
200 #define IO_SLC2_SQB_TRAP 0x00062000
201 #define IO_SLC2_QUEUE_MANAGER_TRAP 0x00062008
202 #define IO_SLC2_FLS_MASTER_TRAP 0x00062010
203
204 /* UnitID 1: HSU Registers */
205 #define IO_HSU_UNITCFG 0x01000000
206 #define IO_HSU_FIR 0x01000008
207 #define IO_HSU_FIR_CLR 0x01000010
208 #define IO_HSU_FEC 0x01000018
209 #define IO_HSU_ERR_ACT_MASK 0x01000020
210 #define IO_HSU_ERR_ATTN_MASK 0x01000028
211 #define IO_HSU_FIRX1_ACT_MASK 0x01000030
212 #define IO_HSU_FIRX0_ACT_MASK 0x01000038
213 #define IO_HSU_SEC_LEM_DEBUG_OVR 0x01000040
214 #define IO_HSU_EXTENDED_ERR_PTR 0x01000048
215 #define IO_HSU_COMMON_CONFIG 0x01000060
216
217 /* UnitID 2: Application Unit (APP) */
218 #define IO_APP_UNITCFG 0x02000000
219 #define IO_APP_FIR 0x02000008
220 #define IO_APP_FIR_CLR 0x02000010
221 #define IO_APP_FEC 0x02000018
222 #define IO_APP_ERR_ACT_MASK 0x02000020
223 #define IO_APP_ERR_ATTN_MASK 0x02000028
224 #define IO_APP_FIRX1_ACT_MASK 0x02000030
225 #define IO_APP_FIRX0_ACT_MASK 0x02000038
226 #define IO_APP_SEC_LEM_DEBUG_OVR 0x02000040
227 #define IO_APP_EXTENDED_ERR_PTR 0x02000048
228 #define IO_APP_COMMON_CONFIG 0x02000060
229
230 #define IO_APP_DEBUG_REG_01 0x02010000
231 #define IO_APP_DEBUG_REG_02 0x02010008
232 #define IO_APP_DEBUG_REG_03 0x02010010
233 #define IO_APP_DEBUG_REG_04 0x02010018
234 #define IO_APP_DEBUG_REG_05 0x02010020
235 #define IO_APP_DEBUG_REG_06 0x02010028
236 #define IO_APP_DEBUG_REG_07 0x02010030
237 #define IO_APP_DEBUG_REG_08 0x02010038
238 #define IO_APP_DEBUG_REG_09 0x02010040
239 #define IO_APP_DEBUG_REG_10 0x02010048
240 #define IO_APP_DEBUG_REG_11 0x02010050
241 #define IO_APP_DEBUG_REG_12 0x02010058
242 #define IO_APP_DEBUG_REG_13 0x02010060
243 #define IO_APP_DEBUG_REG_14 0x02010068
244 #define IO_APP_DEBUG_REG_15 0x02010070
245 #define IO_APP_DEBUG_REG_16 0x02010078
246 #define IO_APP_DEBUG_REG_17 0x02010080
247 #define IO_APP_DEBUG_REG_18 0x02010088
248
249 /* Read/write from/to registers */
250 struct genwqe_reg_io {
251 __u64 num; /* register offset/address */
252 __u64 val64;
253 };
254
255 /*
256 * All registers of our card will return values not equal this values.
257 * If we see IO_ILLEGAL_VALUE on any of our MMIO register reads, the
258 * card can be considered as unusable. It will need recovery.
259 */
260 #define IO_ILLEGAL_VALUE 0xffffffffffffffffull
261
262 /*
263 * Generic DDCB execution interface.
264 *
265 * This interface is a first prototype resulting from discussions we
266 * had with other teams which wanted to use the Genwqe card. It allows
267 * to issue a DDCB request in a generic way. The request will block
268 * until it finishes or time out with error.
269 *
270 * Some DDCBs require DMA addresses to be specified in the ASIV
271 * block. The interface provies the capability to let the kernel
272 * driver know where those addresses are by specifying the ATS field,
273 * such that it can replace the user-space addresses with appropriate
274 * DMA addresses or DMA addresses of a scatter gather list which is
275 * dynamically created.
276 *
277 * Our hardware will refuse DDCB execution if the ATS field is not as
278 * expected. That means the DDCB execution engine in the chip knows
279 * where it expects DMA addresses within the ASIV part of the DDCB and
280 * will check that against the ATS field definition. Any invalid or
281 * unknown ATS content will lead to DDCB refusal.
282 */
283
284 /* Genwqe chip Units */
285 #define DDCB_ACFUNC_SLU 0x00 /* chip service layer unit */
286 #define DDCB_ACFUNC_APP 0x01 /* chip application */
287
288 /* DDCB return codes (RETC) */
289 #define DDCB_RETC_IDLE 0x0000 /* Unexecuted/DDCB created */
290 #define DDCB_RETC_PENDING 0x0101 /* Pending Execution */
291 #define DDCB_RETC_COMPLETE 0x0102 /* Cmd complete. No error */
292 #define DDCB_RETC_FAULT 0x0104 /* App Err, recoverable */
293 #define DDCB_RETC_ERROR 0x0108 /* App Err, non-recoverable */
294 #define DDCB_RETC_FORCED_ERROR 0x01ff /* overwritten by driver */
295
296 #define DDCB_RETC_UNEXEC 0x0110 /* Unexe/Removed from queue */
297 #define DDCB_RETC_TERM 0x0120 /* Terminated */
298 #define DDCB_RETC_RES0 0x0140 /* Reserved */
299 #define DDCB_RETC_RES1 0x0180 /* Reserved */
300
301 /* DDCB Command Options (CMDOPT) */
302 #define DDCB_OPT_ECHO_FORCE_NO 0x0000 /* ECHO DDCB */
303 #define DDCB_OPT_ECHO_FORCE_102 0x0001 /* force return code */
304 #define DDCB_OPT_ECHO_FORCE_104 0x0002
305 #define DDCB_OPT_ECHO_FORCE_108 0x0003
306
307 #define DDCB_OPT_ECHO_FORCE_110 0x0004 /* only on PF ! */
308 #define DDCB_OPT_ECHO_FORCE_120 0x0005
309 #define DDCB_OPT_ECHO_FORCE_140 0x0006
310 #define DDCB_OPT_ECHO_FORCE_180 0x0007
311
312 #define DDCB_OPT_ECHO_COPY_NONE (0 << 5)
313 #define DDCB_OPT_ECHO_COPY_ALL (1 << 5)
314
315 /* Definitions of Service Layer Commands */
316 #define SLCMD_ECHO_SYNC 0x00 /* PF/VF */
317 #define SLCMD_MOVE_FLASH 0x06 /* PF only */
318 #define SLCMD_MOVE_FLASH_FLAGS_MODE 0x03 /* bit 0 and 1 used for mode */
319 #define SLCMD_MOVE_FLASH_FLAGS_DLOAD 0 /* mode: download */
320 #define SLCMD_MOVE_FLASH_FLAGS_EMUL 1 /* mode: emulation */
321 #define SLCMD_MOVE_FLASH_FLAGS_UPLOAD 2 /* mode: upload */
322 #define SLCMD_MOVE_FLASH_FLAGS_VERIFY 3 /* mode: verify */
323 #define SLCMD_MOVE_FLASH_FLAG_NOTAP (1 << 2)/* just dump DDCB and exit */
324 #define SLCMD_MOVE_FLASH_FLAG_POLL (1 << 3)/* wait for RETC >= 0102 */
325 #define SLCMD_MOVE_FLASH_FLAG_PARTITION (1 << 4)
326 #define SLCMD_MOVE_FLASH_FLAG_ERASE (1 << 5)
327
328 enum genwqe_card_state {
329 GENWQE_CARD_UNUSED = 0,
330 GENWQE_CARD_USED = 1,
331 GENWQE_CARD_FATAL_ERROR = 2,
332 GENWQE_CARD_RELOAD_BITSTREAM = 3,
333 GENWQE_CARD_STATE_MAX,
334 };
335
336 /* common struct for chip image exchange */
337 struct genwqe_bitstream {
338 __u64 data_addr; /* pointer to image data */
339 __u32 size; /* size of image file */
340 __u32 crc; /* crc of this image */
341 __u64 target_addr; /* starting address in Flash */
342 __u32 partition; /* '0', '1', or 'v' */
343 __u32 uid; /* 1=host/x=dram */
344
345 __u64 slu_id; /* informational/sim: SluID */
346 __u64 app_id; /* informational/sim: AppID */
347
348 __u16 retc; /* returned from processing */
349 __u16 attn; /* attention code from processing */
350 __u32 progress; /* progress code from processing */
351 };
352
353 /* Issuing a specific DDCB command */
354 #define DDCB_LENGTH 256 /* for debug data */
355 #define DDCB_ASIV_LENGTH 104 /* len of the DDCB ASIV array */
356 #define DDCB_ASIV_LENGTH_ATS 96 /* ASIV in ATS architecture */
357 #define DDCB_ASV_LENGTH 64 /* len of the DDCB ASV array */
358 #define DDCB_FIXUPS 12 /* maximum number of fixups */
359
360 struct genwqe_debug_data {
361 char driver_version[64];
362 __u64 slu_unitcfg;
363 __u64 app_unitcfg;
364
365 __u8 ddcb_before[DDCB_LENGTH];
366 __u8 ddcb_prev[DDCB_LENGTH];
367 __u8 ddcb_finished[DDCB_LENGTH];
368 };
369
370 /*
371 * Address Translation Specification (ATS) definitions
372 *
373 * Each 4 bit within the ATS 64-bit word specify the required address
374 * translation at the defined offset.
375 *
376 * 63 LSB
377 * 6666.5555.5555.5544.4444.4443.3333.3333 ... 11
378 * 3210.9876.5432.1098.7654.3210.9876.5432 ... 1098.7654.3210
379 *
380 * offset: 0x00 0x08 0x10 0x18 0x20 0x28 0x30 0x38 ... 0x68 0x70 0x78
381 * res res res res ASIV ...
382 * The first 4 entries in the ATS word are reserved. The following nibbles
383 * each describe at an 8 byte offset the format of the required data.
384 */
385 #define ATS_TYPE_DATA 0x0ull /* data */
386 #define ATS_TYPE_FLAT_RD 0x4ull /* flat buffer read only */
387 #define ATS_TYPE_FLAT_RDWR 0x5ull /* flat buffer read/write */
388 #define ATS_TYPE_SGL_RD 0x6ull /* sgl read only */
389 #define ATS_TYPE_SGL_RDWR 0x7ull /* sgl read/write */
390
391 #define ATS_SET_FLAGS(_struct, _field, _flags) \
392 (((_flags) & 0xf) << (44 - (4 * (offsetof(_struct, _field) / 8))))
393
394 #define ATS_GET_FLAGS(_ats, _byte_offs) \
395 (((_ats) >> (44 - (4 * ((_byte_offs) / 8)))) & 0xf)
396
397 /**
398 * struct genwqe_ddcb_cmd - User parameter for generic DDCB commands
399 *
400 * On the way into the kernel the driver will read the whole data
401 * structure. On the way out the driver will not copy the ASIV data
402 * back to user-space.
403 */
404 struct genwqe_ddcb_cmd {
405 /* START of data copied to/from driver */
406 __u64 next_addr; /* chaining genwqe_ddcb_cmd */
407 __u64 flags; /* reserved */
408
409 __u8 acfunc; /* accelerators functional unit */
410 __u8 cmd; /* command to execute */
411 __u8 asiv_length; /* used parameter length */
412 __u8 asv_length; /* length of valid return values */
413 __u16 cmdopts; /* command options */
414 __u16 retc; /* return code from processing */
415
416 __u16 attn; /* attention code from processing */
417 __u16 vcrc; /* variant crc16 */
418 __u32 progress; /* progress code from processing */
419
420 __u64 deque_ts; /* dequeue time stamp */
421 __u64 cmplt_ts; /* completion time stamp */
422 __u64 disp_ts; /* SW processing start */
423
424 /* move to end and avoid copy-back */
425 __u64 ddata_addr; /* collect debug data */
426
427 /* command specific values */
428 __u8 asv[DDCB_ASV_LENGTH];
429
430 /* END of data copied from driver */
431 union {
432 struct {
433 __u64 ats;
434 __u8 asiv[DDCB_ASIV_LENGTH_ATS];
435 };
436 /* used for flash update to keep it backward compatible */
437 __u8 __asiv[DDCB_ASIV_LENGTH];
438 };
439 /* END of data copied to driver */
440 };
441
442 #define GENWQE_IOC_CODE 0xa5
443
444 /* Access functions */
445 #define GENWQE_READ_REG64 _IOR(GENWQE_IOC_CODE, 30, struct genwqe_reg_io)
446 #define GENWQE_WRITE_REG64 _IOW(GENWQE_IOC_CODE, 31, struct genwqe_reg_io)
447 #define GENWQE_READ_REG32 _IOR(GENWQE_IOC_CODE, 32, struct genwqe_reg_io)
448 #define GENWQE_WRITE_REG32 _IOW(GENWQE_IOC_CODE, 33, struct genwqe_reg_io)
449 #define GENWQE_READ_REG16 _IOR(GENWQE_IOC_CODE, 34, struct genwqe_reg_io)
450 #define GENWQE_WRITE_REG16 _IOW(GENWQE_IOC_CODE, 35, struct genwqe_reg_io)
451
452 #define GENWQE_GET_CARD_STATE _IOR(GENWQE_IOC_CODE, 36, enum genwqe_card_state)
453
454 /**
455 * struct genwqe_mem - Memory pinning/unpinning information
456 * @addr: virtual user space address
457 * @size: size of the area pin/dma-map/unmap
458 * direction: 0: read/1: read and write
459 *
460 * Avoid pinning and unpinning of memory pages dynamically. Instead
461 * the idea is to pin the whole buffer space required for DDCB
462 * opertionas in advance. The driver will reuse this pinning and the
463 * memory associated with it to setup the sglists for the DDCB
464 * requests without the need to allocate and free memory or map and
465 * unmap to get the DMA addresses.
466 *
467 * The inverse operation needs to be called after the pinning is not
468 * needed anymore. The pinnings else the pinnings will get removed
469 * after the device is closed. Note that pinnings will required
470 * memory.
471 */
472 struct genwqe_mem {
473 __u64 addr;
474 __u64 size;
475 __u64 direction;
476 __u64 flags;
477 };
478
479 #define GENWQE_PIN_MEM _IOWR(GENWQE_IOC_CODE, 40, struct genwqe_mem)
480 #define GENWQE_UNPIN_MEM _IOWR(GENWQE_IOC_CODE, 41, struct genwqe_mem)
481
482 /*
483 * Generic synchronous DDCB execution interface.
484 * Synchronously execute a DDCB.
485 *
486 * Return: 0 on success or negative error code.
487 * -EINVAL: Invalid parameters (ASIV_LEN, ASV_LEN, illegal fixups
488 * no mappings found/could not create mappings
489 * -EFAULT: illegal addresses in fixups, purging failed
490 * -EBADMSG: enqueing failed, retc != DDCB_RETC_COMPLETE
491 */
492 #define GENWQE_EXECUTE_DDCB \
493 _IOWR(GENWQE_IOC_CODE, 50, struct genwqe_ddcb_cmd)
494
495 #define GENWQE_EXECUTE_RAW_DDCB \
496 _IOWR(GENWQE_IOC_CODE, 51, struct genwqe_ddcb_cmd)
497
498 /* Service Layer functions (PF only) */
499 #define GENWQE_SLU_UPDATE _IOWR(GENWQE_IOC_CODE, 80, struct genwqe_bitstream)
500 #define GENWQE_SLU_READ _IOWR(GENWQE_IOC_CODE, 81, struct genwqe_bitstream)
501
502 #endif /* __GENWQE_CARD_H__ */
Browse
Usage
Versions