linux-headers (unknown)

(root)/
include/
linux/
can/
error.h
       1  /* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
       2  /*
       3   * linux/can/error.h
       4   *
       5   * Definitions of the CAN error messages to be filtered and passed to the user.
       6   *
       7   * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
       8   * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
       9   * All rights reserved.
      10   *
      11   * Redistribution and use in source and binary forms, with or without
      12   * modification, are permitted provided that the following conditions
      13   * are met:
      14   * 1. Redistributions of source code must retain the above copyright
      15   *    notice, this list of conditions and the following disclaimer.
      16   * 2. Redistributions in binary form must reproduce the above copyright
      17   *    notice, this list of conditions and the following disclaimer in the
      18   *    documentation and/or other materials provided with the distribution.
      19   * 3. Neither the name of Volkswagen nor the names of its contributors
      20   *    may be used to endorse or promote products derived from this software
      21   *    without specific prior written permission.
      22   *
      23   * Alternatively, provided that this notice is retained in full, this
      24   * software may be distributed under the terms of the GNU General
      25   * Public License ("GPL") version 2, in which case the provisions of the
      26   * GPL apply INSTEAD OF those given above.
      27   *
      28   * The provided data structures and external interfaces from this code
      29   * are not restricted to be used by modules with a GPL compatible license.
      30   *
      31   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
      32   * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
      33   * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
      34   * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
      35   * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
      36   * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
      37   * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
      38   * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
      39   * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
      40   * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
      41   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
      42   * DAMAGE.
      43   */
      44  
      45  #ifndef _CAN_ERROR_H
      46  #define _CAN_ERROR_H
      47  
      48  #define CAN_ERR_DLC 8 /* dlc for error message frames */
      49  
      50  /* error class (mask) in can_id */
      51  #define CAN_ERR_TX_TIMEOUT   0x00000001U /* TX timeout (by netdevice driver) */
      52  #define CAN_ERR_LOSTARB      0x00000002U /* lost arbitration    / data[0]    */
      53  #define CAN_ERR_CRTL         0x00000004U /* controller problems / data[1]    */
      54  #define CAN_ERR_PROT         0x00000008U /* protocol violations / data[2..3] */
      55  #define CAN_ERR_TRX          0x00000010U /* transceiver status  / data[4]    */
      56  #define CAN_ERR_ACK          0x00000020U /* received no ACK on transmission */
      57  #define CAN_ERR_BUSOFF       0x00000040U /* bus off */
      58  #define CAN_ERR_BUSERROR     0x00000080U /* bus error (may flood!) */
      59  #define CAN_ERR_RESTARTED    0x00000100U /* controller restarted */
      60  #define CAN_ERR_CNT          0x00000200U /* TX error counter / data[6] */
      61  					 /* RX error counter / data[7] */
      62  
      63  /* arbitration lost in bit ... / data[0] */
      64  #define CAN_ERR_LOSTARB_UNSPEC   0x00 /* unspecified */
      65  				      /* else bit number in bitstream */
      66  
      67  /* error status of CAN-controller / data[1] */
      68  #define CAN_ERR_CRTL_UNSPEC      0x00 /* unspecified */
      69  #define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
      70  #define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
      71  #define CAN_ERR_CRTL_RX_WARNING  0x04 /* reached warning level for RX errors */
      72  #define CAN_ERR_CRTL_TX_WARNING  0x08 /* reached warning level for TX errors */
      73  #define CAN_ERR_CRTL_RX_PASSIVE  0x10 /* reached error passive status RX */
      74  #define CAN_ERR_CRTL_TX_PASSIVE  0x20 /* reached error passive status TX */
      75  				      /* (at least one error counter exceeds */
      76  				      /* the protocol-defined level of 127)  */
      77  #define CAN_ERR_CRTL_ACTIVE      0x40 /* recovered to error active state */
      78  
      79  /* error in CAN protocol (type) / data[2] */
      80  #define CAN_ERR_PROT_UNSPEC      0x00 /* unspecified */
      81  #define CAN_ERR_PROT_BIT         0x01 /* single bit error */
      82  #define CAN_ERR_PROT_FORM        0x02 /* frame format error */
      83  #define CAN_ERR_PROT_STUFF       0x04 /* bit stuffing error */
      84  #define CAN_ERR_PROT_BIT0        0x08 /* unable to send dominant bit */
      85  #define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
      86  #define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
      87  #define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
      88  #define CAN_ERR_PROT_TX          0x80 /* error occurred on transmission */
      89  
      90  /* error in CAN protocol (location) / data[3] */
      91  #define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
      92  #define CAN_ERR_PROT_LOC_SOF     0x03 /* start of frame */
      93  #define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
      94  #define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
      95  #define CAN_ERR_PROT_LOC_SRTR    0x04 /* substitute RTR (SFF: RTR) */
      96  #define CAN_ERR_PROT_LOC_IDE     0x05 /* identifier extension */
      97  #define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
      98  #define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
      99  #define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
     100  #define CAN_ERR_PROT_LOC_RTR     0x0C /* RTR */
     101  #define CAN_ERR_PROT_LOC_RES1    0x0D /* reserved bit 1 */
     102  #define CAN_ERR_PROT_LOC_RES0    0x09 /* reserved bit 0 */
     103  #define CAN_ERR_PROT_LOC_DLC     0x0B /* data length code */
     104  #define CAN_ERR_PROT_LOC_DATA    0x0A /* data section */
     105  #define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
     106  #define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
     107  #define CAN_ERR_PROT_LOC_ACK     0x19 /* ACK slot */
     108  #define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
     109  #define CAN_ERR_PROT_LOC_EOF     0x1A /* end of frame */
     110  #define CAN_ERR_PROT_LOC_INTERM  0x12 /* intermission */
     111  
     112  /* error status of CAN-transceiver / data[4] */
     113  /*                                             CANH CANL */
     114  #define CAN_ERR_TRX_UNSPEC             0x00 /* 0000 0000 */
     115  #define CAN_ERR_TRX_CANH_NO_WIRE       0x04 /* 0000 0100 */
     116  #define CAN_ERR_TRX_CANH_SHORT_TO_BAT  0x05 /* 0000 0101 */
     117  #define CAN_ERR_TRX_CANH_SHORT_TO_VCC  0x06 /* 0000 0110 */
     118  #define CAN_ERR_TRX_CANH_SHORT_TO_GND  0x07 /* 0000 0111 */
     119  #define CAN_ERR_TRX_CANL_NO_WIRE       0x40 /* 0100 0000 */
     120  #define CAN_ERR_TRX_CANL_SHORT_TO_BAT  0x50 /* 0101 0000 */
     121  #define CAN_ERR_TRX_CANL_SHORT_TO_VCC  0x60 /* 0110 0000 */
     122  #define CAN_ERR_TRX_CANL_SHORT_TO_GND  0x70 /* 0111 0000 */
     123  #define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
     124  
     125  /* data[5] is reserved (do not use) */
     126  
     127  /* TX error counter / data[6] */
     128  /* RX error counter / data[7] */
     129  
     130  /* CAN state thresholds
     131   *
     132   * Error counter	Error state
     133   * -----------------------------------
     134   * 0 -  95		Error-active
     135   * 96 - 127		Error-warning
     136   * 128 - 255		Error-passive
     137   * 256 and greater	Bus-off
     138   */
     139  #define CAN_ERROR_WARNING_THRESHOLD 96
     140  #define CAN_ERROR_PASSIVE_THRESHOLD 128
     141  #define CAN_BUS_OFF_THRESHOLD 256
     142  
     143  #endif /* _CAN_ERROR_H */