linux-headers (unknown)
1 /* SPDX-License-Identifier: MIT */
2 /* Copyright (C) B.A.T.M.A.N. contributors:
3 *
4 * Matthias Schiffer
5 */
6
7 #ifndef _LINUX_BATMAN_ADV_H_
8 #define _LINUX_BATMAN_ADV_H_
9
10 #define BATADV_NL_NAME "batadv"
11
12 #define BATADV_NL_MCAST_GROUP_CONFIG "config"
13 #define BATADV_NL_MCAST_GROUP_TPMETER "tpmeter"
14
15 /**
16 * enum batadv_tt_client_flags - TT client specific flags
17 *
18 * Bits from 0 to 7 are called _remote flags_ because they are sent on the wire.
19 * Bits from 8 to 15 are called _local flags_ because they are used for local
20 * computations only.
21 *
22 * Bits from 4 to 7 - a subset of remote flags - are ensured to be in sync with
23 * the other nodes in the network. To achieve this goal these flags are included
24 * in the TT CRC computation.
25 */
26 enum batadv_tt_client_flags {
27 /**
28 * @BATADV_TT_CLIENT_DEL: the client has to be deleted from the table
29 */
30 BATADV_TT_CLIENT_DEL = (1 << 0),
31
32 /**
33 * @BATADV_TT_CLIENT_ROAM: the client roamed to/from another node and
34 * the new update telling its new real location has not been
35 * received/sent yet
36 */
37 BATADV_TT_CLIENT_ROAM = (1 << 1),
38
39 /**
40 * @BATADV_TT_CLIENT_WIFI: this client is connected through a wifi
41 * interface. This information is used by the "AP Isolation" feature
42 */
43 BATADV_TT_CLIENT_WIFI = (1 << 4),
44
45 /**
46 * @BATADV_TT_CLIENT_ISOLA: this client is considered "isolated". This
47 * information is used by the Extended Isolation feature
48 */
49 BATADV_TT_CLIENT_ISOLA = (1 << 5),
50
51 /**
52 * @BATADV_TT_CLIENT_NOPURGE: this client should never be removed from
53 * the table
54 */
55 BATADV_TT_CLIENT_NOPURGE = (1 << 8),
56
57 /**
58 * @BATADV_TT_CLIENT_NEW: this client has been added to the local table
59 * but has not been announced yet
60 */
61 BATADV_TT_CLIENT_NEW = (1 << 9),
62
63 /**
64 * @BATADV_TT_CLIENT_PENDING: this client is marked for removal but it
65 * is kept in the table for one more originator interval for consistency
66 * purposes
67 */
68 BATADV_TT_CLIENT_PENDING = (1 << 10),
69
70 /**
71 * @BATADV_TT_CLIENT_TEMP: this global client has been detected to be
72 * part of the network but no node has already announced it
73 */
74 BATADV_TT_CLIENT_TEMP = (1 << 11),
75 };
76
77 /**
78 * enum batadv_mcast_flags_priv - Private, own multicast flags
79 *
80 * These are internal, multicast related flags. Currently they describe certain
81 * multicast related attributes of the segment this originator bridges into the
82 * mesh.
83 *
84 * Those attributes are used to determine the public multicast flags this
85 * originator is going to announce via TT.
86 *
87 * For netlink, if BATADV_MCAST_FLAGS_BRIDGED is unset then all querier
88 * related flags are undefined.
89 */
90 enum batadv_mcast_flags_priv {
91 /**
92 * @BATADV_MCAST_FLAGS_BRIDGED: There is a bridge on top of the mesh
93 * interface.
94 */
95 BATADV_MCAST_FLAGS_BRIDGED = (1 << 0),
96
97 /**
98 * @BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS: Whether an IGMP querier
99 * exists in the mesh
100 */
101 BATADV_MCAST_FLAGS_QUERIER_IPV4_EXISTS = (1 << 1),
102
103 /**
104 * @BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS: Whether an MLD querier
105 * exists in the mesh
106 */
107 BATADV_MCAST_FLAGS_QUERIER_IPV6_EXISTS = (1 << 2),
108
109 /**
110 * @BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING: If an IGMP querier
111 * exists, whether it is potentially shadowing multicast listeners
112 * (i.e. querier is behind our own bridge segment)
113 */
114 BATADV_MCAST_FLAGS_QUERIER_IPV4_SHADOWING = (1 << 3),
115
116 /**
117 * @BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING: If an MLD querier
118 * exists, whether it is potentially shadowing multicast listeners
119 * (i.e. querier is behind our own bridge segment)
120 */
121 BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING = (1 << 4),
122 };
123
124 /**
125 * enum batadv_gw_modes - gateway mode of node
126 */
127 enum batadv_gw_modes {
128 /** @BATADV_GW_MODE_OFF: gw mode disabled */
129 BATADV_GW_MODE_OFF,
130
131 /** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */
132 BATADV_GW_MODE_CLIENT,
133
134 /** @BATADV_GW_MODE_SERVER: announce itself as gateway server */
135 BATADV_GW_MODE_SERVER,
136 };
137
138 /**
139 * enum batadv_nl_attrs - batman-adv netlink attributes
140 */
141 enum batadv_nl_attrs {
142 /**
143 * @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
144 */
145 BATADV_ATTR_UNSPEC,
146
147 /**
148 * @BATADV_ATTR_VERSION: batman-adv version string
149 */
150 BATADV_ATTR_VERSION,
151
152 /**
153 * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
154 */
155 BATADV_ATTR_ALGO_NAME,
156
157 /**
158 * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
159 */
160 BATADV_ATTR_MESH_IFINDEX,
161
162 /**
163 * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
164 */
165 BATADV_ATTR_MESH_IFNAME,
166
167 /**
168 * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
169 */
170 BATADV_ATTR_MESH_ADDRESS,
171
172 /**
173 * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
174 */
175 BATADV_ATTR_HARD_IFINDEX,
176
177 /**
178 * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
179 */
180 BATADV_ATTR_HARD_IFNAME,
181
182 /**
183 * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv
184 * interface
185 */
186 BATADV_ATTR_HARD_ADDRESS,
187
188 /**
189 * @BATADV_ATTR_ORIG_ADDRESS: originator mac address
190 */
191 BATADV_ATTR_ORIG_ADDRESS,
192
193 /**
194 * @BATADV_ATTR_TPMETER_RESULT: result of run (see
195 * batadv_tp_meter_status)
196 */
197 BATADV_ATTR_TPMETER_RESULT,
198
199 /**
200 * @BATADV_ATTR_TPMETER_TEST_TIME: time (msec) the run took
201 */
202 BATADV_ATTR_TPMETER_TEST_TIME,
203
204 /**
205 * @BATADV_ATTR_TPMETER_BYTES: amount of acked bytes during run
206 */
207 BATADV_ATTR_TPMETER_BYTES,
208
209 /**
210 * @BATADV_ATTR_TPMETER_COOKIE: session cookie to match tp_meter session
211 */
212 BATADV_ATTR_TPMETER_COOKIE,
213
214 /**
215 * @BATADV_ATTR_PAD: attribute used for padding for 64-bit alignment
216 */
217 BATADV_ATTR_PAD,
218
219 /**
220 * @BATADV_ATTR_ACTIVE: Flag indicating if the hard interface is active
221 */
222 BATADV_ATTR_ACTIVE,
223
224 /**
225 * @BATADV_ATTR_TT_ADDRESS: Client MAC address
226 */
227 BATADV_ATTR_TT_ADDRESS,
228
229 /**
230 * @BATADV_ATTR_TT_TTVN: Translation table version
231 */
232 BATADV_ATTR_TT_TTVN,
233
234 /**
235 * @BATADV_ATTR_TT_LAST_TTVN: Previous translation table version
236 */
237 BATADV_ATTR_TT_LAST_TTVN,
238
239 /**
240 * @BATADV_ATTR_TT_CRC32: CRC32 over translation table
241 */
242 BATADV_ATTR_TT_CRC32,
243
244 /**
245 * @BATADV_ATTR_TT_VID: VLAN ID
246 */
247 BATADV_ATTR_TT_VID,
248
249 /**
250 * @BATADV_ATTR_TT_FLAGS: Translation table client flags
251 */
252 BATADV_ATTR_TT_FLAGS,
253
254 /**
255 * @BATADV_ATTR_FLAG_BEST: Flags indicating entry is the best
256 */
257 BATADV_ATTR_FLAG_BEST,
258
259 /**
260 * @BATADV_ATTR_LAST_SEEN_MSECS: Time in milliseconds since last seen
261 */
262 BATADV_ATTR_LAST_SEEN_MSECS,
263
264 /**
265 * @BATADV_ATTR_NEIGH_ADDRESS: Neighbour MAC address
266 */
267 BATADV_ATTR_NEIGH_ADDRESS,
268
269 /**
270 * @BATADV_ATTR_TQ: TQ to neighbour
271 */
272 BATADV_ATTR_TQ,
273
274 /**
275 * @BATADV_ATTR_THROUGHPUT: Estimated throughput to Neighbour
276 */
277 BATADV_ATTR_THROUGHPUT,
278
279 /**
280 * @BATADV_ATTR_BANDWIDTH_UP: Reported uplink bandwidth
281 */
282 BATADV_ATTR_BANDWIDTH_UP,
283
284 /**
285 * @BATADV_ATTR_BANDWIDTH_DOWN: Reported downlink bandwidth
286 */
287 BATADV_ATTR_BANDWIDTH_DOWN,
288
289 /**
290 * @BATADV_ATTR_ROUTER: Gateway router MAC address
291 */
292 BATADV_ATTR_ROUTER,
293
294 /**
295 * @BATADV_ATTR_BLA_OWN: Flag indicating own originator
296 */
297 BATADV_ATTR_BLA_OWN,
298
299 /**
300 * @BATADV_ATTR_BLA_ADDRESS: Bridge loop avoidance claim MAC address
301 */
302 BATADV_ATTR_BLA_ADDRESS,
303
304 /**
305 * @BATADV_ATTR_BLA_VID: BLA VLAN ID
306 */
307 BATADV_ATTR_BLA_VID,
308
309 /**
310 * @BATADV_ATTR_BLA_BACKBONE: BLA gateway originator MAC address
311 */
312 BATADV_ATTR_BLA_BACKBONE,
313
314 /**
315 * @BATADV_ATTR_BLA_CRC: BLA CRC
316 */
317 BATADV_ATTR_BLA_CRC,
318
319 /**
320 * @BATADV_ATTR_DAT_CACHE_IP4ADDRESS: Client IPv4 address
321 */
322 BATADV_ATTR_DAT_CACHE_IP4ADDRESS,
323
324 /**
325 * @BATADV_ATTR_DAT_CACHE_HWADDRESS: Client MAC address
326 */
327 BATADV_ATTR_DAT_CACHE_HWADDRESS,
328
329 /**
330 * @BATADV_ATTR_DAT_CACHE_VID: VLAN ID
331 */
332 BATADV_ATTR_DAT_CACHE_VID,
333
334 /**
335 * @BATADV_ATTR_MCAST_FLAGS: Per originator multicast flags
336 */
337 BATADV_ATTR_MCAST_FLAGS,
338
339 /**
340 * @BATADV_ATTR_MCAST_FLAGS_PRIV: Private, own multicast flags
341 */
342 BATADV_ATTR_MCAST_FLAGS_PRIV,
343
344 /**
345 * @BATADV_ATTR_VLANID: VLAN id on top of soft interface
346 */
347 BATADV_ATTR_VLANID,
348
349 /**
350 * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol
351 * messages of the mesh interface shall be aggregated or not.
352 */
353 BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
354
355 /**
356 * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going
357 * from a wireless client to another wireless client will be silently
358 * dropped.
359 */
360 BATADV_ATTR_AP_ISOLATION_ENABLED,
361
362 /**
363 * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to
364 * classify clients as "isolated" by the Extended Isolation feature.
365 */
366 BATADV_ATTR_ISOLATION_MARK,
367
368 /**
369 * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to
370 * classify clients as "isolated" by the Extended Isolation feature.
371 */
372 BATADV_ATTR_ISOLATION_MASK,
373
374 /**
375 * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through
376 * the mesh will be sent using multiple interfaces at the same time.
377 */
378 BATADV_ATTR_BONDING_ENABLED,
379
380 /**
381 * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop
382 * avoidance feature is enabled. This feature detects and avoids loops
383 * between the mesh and devices bridged with the soft interface
384 */
385 BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
386
387 /**
388 * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed
389 * arp table feature is enabled. This feature uses a distributed hash
390 * table to answer ARP requests without flooding the request through
391 * the whole mesh.
392 */
393 BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
394
395 /**
396 * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going
397 * through the mesh will be fragmented or silently discarded if the
398 * packet size exceeds the outgoing interface MTU.
399 */
400 BATADV_ATTR_FRAGMENTATION_ENABLED,
401
402 /**
403 * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which
404 * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
405 * to 'server'.
406 */
407 BATADV_ATTR_GW_BANDWIDTH_DOWN,
408
409 /**
410 * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which
411 * is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
412 * to 'server'.
413 */
414 BATADV_ATTR_GW_BANDWIDTH_UP,
415
416 /**
417 * @BATADV_ATTR_GW_MODE: defines the state of the gateway features.
418 * Possible values are specified in enum batadv_gw_modes
419 */
420 BATADV_ATTR_GW_MODE,
421
422 /**
423 * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node
424 * will use to choose a gateway if gw_mode was set to 'client'.
425 */
426 BATADV_ATTR_GW_SEL_CLASS,
427
428 /**
429 * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied
430 * to an originator message's tq-field on every hop and/or per
431 * hard interface
432 */
433 BATADV_ATTR_HOP_PENALTY,
434
435 /**
436 * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
437 * should be send to the debug log/trace ring buffer
438 */
439 BATADV_ATTR_LOG_LEVEL,
440
441 /**
442 * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED: whether multicast
443 * optimizations should be replaced by simple broadcast-like flooding
444 * of multicast packets. If set to non-zero then all nodes in the mesh
445 * are going to use classic flooding for any multicast packet with no
446 * optimizations.
447 */
448 BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,
449
450 /**
451 * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using
452 * some magic to send fewer wifi packets but still the same content) is
453 * enabled or not.
454 */
455 BATADV_ATTR_NETWORK_CODING_ENABLED,
456
457 /**
458 * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in
459 * which batman sends its protocol messages.
460 */
461 BATADV_ATTR_ORIG_INTERVAL,
462
463 /**
464 * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in
465 * which batman emits probing packets for neighbor sensing (ELP).
466 */
467 BATADV_ATTR_ELP_INTERVAL,
468
469 /**
470 * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be
471 * used by B.A.T.M.A.N. V when estimating the link throughput using
472 * this interface. If the value is set to 0 then batman-adv will try to
473 * estimate the throughput by itself.
474 */
475 BATADV_ATTR_THROUGHPUT_OVERRIDE,
476
477 /**
478 * @BATADV_ATTR_MULTICAST_FANOUT: defines the maximum number of packet
479 * copies that may be generated for a multicast-to-unicast conversion.
480 * Once this limit is exceeded distribution will fall back to broadcast.
481 */
482 BATADV_ATTR_MULTICAST_FANOUT,
483
484 /* add attributes above here, update the policy in netlink.c */
485
486 /**
487 * @__BATADV_ATTR_AFTER_LAST: internal use
488 */
489 __BATADV_ATTR_AFTER_LAST,
490
491 /**
492 * @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
493 */
494 NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
495
496 /**
497 * @BATADV_ATTR_MAX: highest attribute number currently defined
498 */
499 BATADV_ATTR_MAX = __BATADV_ATTR_AFTER_LAST - 1
500 };
501
502 /**
503 * enum batadv_nl_commands - supported batman-adv netlink commands
504 */
505 enum batadv_nl_commands {
506 /**
507 * @BATADV_CMD_UNSPEC: unspecified command to catch errors
508 */
509 BATADV_CMD_UNSPEC,
510
511 /**
512 * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh
513 */
514 BATADV_CMD_GET_MESH,
515
516 /**
517 * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH
518 */
519 BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH,
520
521 /**
522 * @BATADV_CMD_TP_METER: Start a tp meter session
523 */
524 BATADV_CMD_TP_METER,
525
526 /**
527 * @BATADV_CMD_TP_METER_CANCEL: Cancel a tp meter session
528 */
529 BATADV_CMD_TP_METER_CANCEL,
530
531 /**
532 * @BATADV_CMD_GET_ROUTING_ALGOS: Query the list of routing algorithms.
533 */
534 BATADV_CMD_GET_ROUTING_ALGOS,
535
536 /**
537 * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the
538 * current softif
539 */
540 BATADV_CMD_GET_HARDIF,
541
542 /**
543 * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF
544 */
545 BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF,
546
547 /**
548 * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations
549 */
550 BATADV_CMD_GET_TRANSTABLE_LOCAL,
551
552 /**
553 * @BATADV_CMD_GET_TRANSTABLE_GLOBAL: Query list of global translations
554 */
555 BATADV_CMD_GET_TRANSTABLE_GLOBAL,
556
557 /**
558 * @BATADV_CMD_GET_ORIGINATORS: Query list of originators
559 */
560 BATADV_CMD_GET_ORIGINATORS,
561
562 /**
563 * @BATADV_CMD_GET_NEIGHBORS: Query list of neighbours
564 */
565 BATADV_CMD_GET_NEIGHBORS,
566
567 /**
568 * @BATADV_CMD_GET_GATEWAYS: Query list of gateways
569 */
570 BATADV_CMD_GET_GATEWAYS,
571
572 /**
573 * @BATADV_CMD_GET_BLA_CLAIM: Query list of bridge loop avoidance claims
574 */
575 BATADV_CMD_GET_BLA_CLAIM,
576
577 /**
578 * @BATADV_CMD_GET_BLA_BACKBONE: Query list of bridge loop avoidance
579 * backbones
580 */
581 BATADV_CMD_GET_BLA_BACKBONE,
582
583 /**
584 * @BATADV_CMD_GET_DAT_CACHE: Query list of DAT cache entries
585 */
586 BATADV_CMD_GET_DAT_CACHE,
587
588 /**
589 * @BATADV_CMD_GET_MCAST_FLAGS: Query list of multicast flags
590 */
591 BATADV_CMD_GET_MCAST_FLAGS,
592
593 /**
594 * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh
595 */
596 BATADV_CMD_SET_MESH,
597
598 /**
599 * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the
600 * current softif
601 */
602 BATADV_CMD_SET_HARDIF,
603
604 /**
605 * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the
606 * current softif
607 */
608 BATADV_CMD_GET_VLAN,
609
610 /**
611 * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the
612 * current softif
613 */
614 BATADV_CMD_SET_VLAN,
615
616 /* add new commands above here */
617
618 /**
619 * @__BATADV_CMD_AFTER_LAST: internal use
620 */
621 __BATADV_CMD_AFTER_LAST,
622
623 /**
624 * @BATADV_CMD_MAX: highest used command number
625 */
626 BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
627 };
628
629 /**
630 * enum batadv_tp_meter_reason - reason of a tp meter test run stop
631 */
632 enum batadv_tp_meter_reason {
633 /**
634 * @BATADV_TP_REASON_COMPLETE: sender finished tp run
635 */
636 BATADV_TP_REASON_COMPLETE = 3,
637
638 /**
639 * @BATADV_TP_REASON_CANCEL: sender was stopped during run
640 */
641 BATADV_TP_REASON_CANCEL = 4,
642
643 /* error status >= 128 */
644
645 /**
646 * @BATADV_TP_REASON_DST_UNREACHABLE: receiver could not be reached or
647 * didn't answer
648 */
649 BATADV_TP_REASON_DST_UNREACHABLE = 128,
650
651 /**
652 * @BATADV_TP_REASON_RESEND_LIMIT: (unused) sender retry reached limit
653 */
654 BATADV_TP_REASON_RESEND_LIMIT = 129,
655
656 /**
657 * @BATADV_TP_REASON_ALREADY_ONGOING: test to or from the same node
658 * already ongoing
659 */
660 BATADV_TP_REASON_ALREADY_ONGOING = 130,
661
662 /**
663 * @BATADV_TP_REASON_MEMORY_ERROR: test was stopped due to low memory
664 */
665 BATADV_TP_REASON_MEMORY_ERROR = 131,
666
667 /**
668 * @BATADV_TP_REASON_CANT_SEND: failed to send via outgoing interface
669 */
670 BATADV_TP_REASON_CANT_SEND = 132,
671
672 /**
673 * @BATADV_TP_REASON_TOO_MANY: too many ongoing sessions
674 */
675 BATADV_TP_REASON_TOO_MANY = 133,
676 };
677
678 /**
679 * enum batadv_ifla_attrs - batman-adv ifla nested attributes
680 */
681 enum batadv_ifla_attrs {
682 /**
683 * @IFLA_BATADV_UNSPEC: unspecified attribute which is not parsed by
684 * rtnetlink
685 */
686 IFLA_BATADV_UNSPEC,
687
688 /**
689 * @IFLA_BATADV_ALGO_NAME: routing algorithm (name) which should be
690 * used by the newly registered batadv net_device.
691 */
692 IFLA_BATADV_ALGO_NAME,
693
694 /* add attributes above here, update the policy in soft-interface.c */
695
696 /**
697 * @__IFLA_BATADV_MAX: internal use
698 */
699 __IFLA_BATADV_MAX,
700 };
701
702 #define IFLA_BATADV_MAX (__IFLA_BATADV_MAX - 1)
703
704 #endif /* _LINUX_BATMAN_ADV_H_ */
Browse
Usage
Versions