PARTX(8) System Administration PARTX(8)
NAME
partx - tell the kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-P|-r|-s|-u] [-t type] [-n M:_N_] [-] disk
partx [-a|-d|-P|-r|-s|-u] [-t type] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It can also tell
the kernel to add or remove partitions from its bookkeeping.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were
a whole disk (for example to list nested subpartitions), use the argument "-" (hyphen-minus). For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than as a partition.
partx is not an fdisk program - adding and removing partitions does not change the disk, it just tells the kernel
about the presence and numbering of on-disk partitions.
OPTIONS
-a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the sizes in bytes rather than in a human-readable format.
By default, the unit, sizes are expressed in, is byte, and unit prefixes are in power of 2^10 (1024).
Abbreviations of symbols are exhibited truncated in order to reach a better readability, by exhibiting alone
the first letter of them; examples: "1 KiB" and "1 MiB" are respectively exhibited as "1 K" and "1 M", then
omitting on purpose the mention "iB", which is part of these abbreviations.
-d, --delete
Delete the specified partitions or all partitions. It is not error to remove non-existing partitions, so this
option is possible to use together with large --nr ranges without care about the current partitions set on
the device.
-g, --noheadings
Do not print a header line with --show or --raw.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in
favour of --show. Do not use it in newly written scripts.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format M-N is supported. The range may
contain negative numbers, for example --nr -1:-1 means the last partition, and --nr -2:-1 means the last two
partitions. Supported range specifications are:
M
Specifies just one partition (e.g. --nr 3).
M:
Specifies the lower limit only (e.g. --nr 2:).
:N
Specifies the upper limit only (e.g. --nr :4).
M:N
Specifies the lower and upper limits (e.g. --nr 2:4).
-o, --output list
Define the output columns to use for --show, --pairs and --raw output. If no output arrangement is specified,
then a default set is used. Use --help to get list of all supported columns. This option cannot be combined
with the --add, --delete, --update or --list options.
--output-all
Output all available columns.
-P, --pairs
List the partitions using the KEY="value" format.
-r, --raw
List the partitions using the raw output format.
-s, --show
List the partitions. The output columns can be selected and rearranged with the --output option. All numbers
(except SIZE) are in 512-byte sectors.
-t, --type type
Specify the partition table type.
--list-types
List supported partition types and exit.
-u, --update
Update the specified partitions.
-S, --sector-size size
Overwrite default sector size.
-v, --verbose
Verbose mode.
-h, --help
Display help text and exit.
-V, --version
Print version and exit.
ENVIRONMENT
LIBBLKID_DEBUG=all
enables libblkid debug output.
EXAMPLE
partx --show /dev/sdb3, partx --show --nr 3 /dev/sdb, partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 5 /dev/sdb
Prints the start sector of partition 5 on /dev/sdb without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
AUTHORS
[34mDavidlohr Bueso <dave@gnu.org>, [34mKarel Zak <kzak@redhat.com>
The original version was written by [34mAndries E. Brouwer <aeb@cwi.nl>
SEE ALSO
addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)
REPORTING BUGS
For bug reports, use the issue tracker at [34mhttps://github.com/util-linux/util-linux/issues.
AVAILABILITY
The partx command is part of the util-linux package which can be downloaded from [34mLinux Kernel Archive
<https://www.kernel.org/pub/linux/utils/util-linux/>.
util-linux 2.39 2022-05-11 PARTX(8)
NAME
partx - tell the kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-P|-r|-s|-u] [-t type] [-n M:_N_] [-] disk
partx [-a|-d|-P|-r|-s|-u] [-t type] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It can also tell
the kernel to add or remove partitions from its bookkeeping.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were
a whole disk (for example to list nested subpartitions), use the argument "-" (hyphen-minus). For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than as a partition.
partx is not an fdisk program - adding and removing partitions does not change the disk, it just tells the kernel
about the presence and numbering of on-disk partitions.
OPTIONS
-a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the sizes in bytes rather than in a human-readable format.
By default, the unit, sizes are expressed in, is byte, and unit prefixes are in power of 2^10 (1024).
Abbreviations of symbols are exhibited truncated in order to reach a better readability, by exhibiting alone
the first letter of them; examples: "1 KiB" and "1 MiB" are respectively exhibited as "1 K" and "1 M", then
omitting on purpose the mention "iB", which is part of these abbreviations.
-d, --delete
Delete the specified partitions or all partitions. It is not error to remove non-existing partitions, so this
option is possible to use together with large --nr ranges without care about the current partitions set on
the device.
-g, --noheadings
Do not print a header line with --show or --raw.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in
favour of --show. Do not use it in newly written scripts.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format M-N is supported. The range may
contain negative numbers, for example --nr -1:-1 means the last partition, and --nr -2:-1 means the last two
partitions. Supported range specifications are:
M
Specifies just one partition (e.g. --nr 3).
M:
Specifies the lower limit only (e.g. --nr 2:).
:N
Specifies the upper limit only (e.g. --nr :4).
M:N
Specifies the lower and upper limits (e.g. --nr 2:4).
-o, --output list
Define the output columns to use for --show, --pairs and --raw output. If no output arrangement is specified,
then a default set is used. Use --help to get list of all supported columns. This option cannot be combined
with the --add, --delete, --update or --list options.
--output-all
Output all available columns.
-P, --pairs
List the partitions using the KEY="value" format.
-r, --raw
List the partitions using the raw output format.
-s, --show
List the partitions. The output columns can be selected and rearranged with the --output option. All numbers
(except SIZE) are in 512-byte sectors.
-t, --type type
Specify the partition table type.
--list-types
List supported partition types and exit.
-u, --update
Update the specified partitions.
-S, --sector-size size
Overwrite default sector size.
-v, --verbose
Verbose mode.
-h, --help
Display help text and exit.
-V, --version
Print version and exit.
ENVIRONMENT
LIBBLKID_DEBUG=all
enables libblkid debug output.
EXAMPLE
partx --show /dev/sdb3, partx --show --nr 3 /dev/sdb, partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 5 /dev/sdb
Prints the start sector of partition 5 on /dev/sdb without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
AUTHORS
[34mDavidlohr Bueso <dave@gnu.org>, [34mKarel Zak <kzak@redhat.com>
The original version was written by [34mAndries E. Brouwer <aeb@cwi.nl>
SEE ALSO
addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)
REPORTING BUGS
For bug reports, use the issue tracker at [34mhttps://github.com/util-linux/util-linux/issues.
AVAILABILITY
The partx command is part of the util-linux package which can be downloaded from [34mLinux Kernel Archive
<https://www.kernel.org/pub/linux/utils/util-linux/>.
util-linux 2.39 2022-05-11 PARTX(8)