MAKE(1) User Commands MAKE(1)
NAME
make - GNU make utility to maintain groups of programs
SYNOPSIS
make [OPTION]... [TARGET]...
DESCRIPTION
The make utility will determine automatically which pieces of a large program need to be recompiled, and issue
the commands to recompile them. The manual describes the GNU implementation of make, which was written by
Richard Stallman and Roland McGrath, and is currently maintained by Paul Smith. Our examples show C programs,
since they are very common, but you can use make with any programming language whose compiler can be run with a
shell command. In fact, make is not limited to programs. You can use it to describe any task where some files
must be updated automatically from others whenever the others change.
To prepare to use make, you must write a file called the makefile that describes the relationships among files in
your program, and provides commands for updating each file. In a program, typically the executable file is up‐
dated from object files, which are in turn made by compiling source files.
Once a suitable makefile exists, each time you change some source files, this simple shell command:
make
suffices to perform all necessary recompilations. The make program uses the makefile description and the last-
modification times of the files to decide which of the files need to be updated. For each of those files, it is‐
sues the commands recorded in the makefile.
make executes commands in the makefile to update one or more targets, where target is typically a program. If no
-f option is present, make will look for the makefiles GNUmakefile, makefile, and Makefile, in that order.
Normally you should call your makefile either makefile or Makefile. (We recommend Makefile because it appears
prominently near the beginning of a directory listing, right near other important files such as README.) The
first name checked, GNUmakefile, is not recommended for most makefiles. You should use this name if you have a
makefile that is specific to GNU make, and will not be understood by other versions of make. If makefile is '-',
the standard input is read.
make updates a target if it depends on prerequisite files that have been modified since the target was last modi‐
fied, or if the target does not exist.
OPTIONS
-b, -m
These options are ignored for compatibility with other versions of make.
-B, --always-make
Unconditionally make all targets.
-C dir, --directory=dir
Change to directory dir before reading the makefiles or doing anything else. If multiple -C options are
specified, each is interpreted relative to the previous one: -C / -C etc is equivalent to -C /etc. This is
typically used with recursive invocations of make.
-d Print debugging information in addition to normal processing. The debugging information says which files
are being considered for remaking, which file-times are being compared and with what results, which files
actually need to be remade, which implicit rules are considered and which are applied---everything interest‐
ing about how make decides what to do.
--debug[=FLAGS]
Print debugging information in addition to normal processing. If the FLAGS are omitted, then the behavior
is the same as if -d was specified. FLAGS may be any or all of the following names, comma- or space-sepa‐
rated. Only the first character is significant: the rest may be omitted: all for all debugging output (same
as using -d), basic for basic debugging, verbose for more verbose basic debugging, implicit for showing im‐
plicit rule search operations, jobs for details on invocation of commands, makefile for debugging while re‐
making makefiles, print shows all recipes that are run even if they are silent, and why shows the reason
make decided to rebuild each target. Use none to disable all previous debugging flags.
-e, --environment-overrides
Give variables taken from the environment precedence over variables from makefiles.
-E string, --eval string
Interpret string using the eval function, before parsing any makefiles.
-f file, --file=file, --makefile=FILE
Use file as a makefile.
-i, --ignore-errors
Ignore all errors in commands executed to remake files.
-I dir, --include-dir=dir
Specifies a directory dir to search for included makefiles. If several -I options are used to specify sev‐
eral directories, the directories are searched in the order specified. Unlike the arguments to other flags
of make, directories given with -I flags may come directly after the flag: -Idir is allowed, as well as -I
dir. This syntax is allowed for compatibility with the C preprocessor's -I flag.
-j [jobs], --jobs[=jobs]
Specifies the number of jobs (commands) to run simultaneously. If there is more than one -j option, the
last one is effective. If the -j option is given without an argument, make will not limit the number of
jobs that can run simultaneously.
--jobserver-style=style
The style of jobserver to use. The style may be one of fifo, pipe, or sem (Windows only).
-k, --keep-going
Continue as much as possible after an error. While the target that failed, and those that depend on it,
cannot be remade, the other dependencies of these targets can be processed all the same.
-l [load], --load-average[=load]
Specifies that no new jobs (commands) should be started if there are others jobs running and the load aver‐
age is at least load (a floating-point number). With no argument, removes a previous load limit.
-L, --check-symlink-times
Use the latest mtime between symlinks and target.
-n, --just-print, --dry-run, --recon
Print the commands that would be executed, but do not execute them (except in certain circumstances).
-o file, --old-file=file, --assume-old=file
Do not remake the file file even if it is older than its dependencies, and do not remake anything on account
of changes in file. Essentially the file is treated as very old and its rules are ignored.
-O[type], --output-sync[=type]
When running multiple jobs in parallel with -j, ensure the output of each job is collected together rather
than interspersed with output from other jobs. If type is not specified or is target the output from the
entire recipe for each target is grouped together. If type is line the output from each command line within
a recipe is grouped together. If type is recurse output from an entire recursive make is grouped together.
If type is none output synchronization is disabled.
-p, --print-data-base
Print the data base (rules and variable values) that results from reading the makefiles; then execute as
usual or as otherwise specified. This also prints the version information given by the -v switch (see be‐
low). To print the data base without trying to remake any files, use make -p -f/dev/null.
-q, --question
‘‘Question mode''. Do not run any commands, or print anything; just return an exit status that is zero if
the specified targets are already up to date, nonzero otherwise.
-r, --no-builtin-rules
Eliminate use of the built-in implicit rules. Also clear out the default list of suffixes for suffix rules.
-R, --no-builtin-variables
Don't define any built-in variables.
-s, --silent, --quiet
Silent operation; do not print the commands as they are executed.
--no-silent
Cancel the effect of the -s option.
-S, --no-keep-going, --stop
Cancel the effect of the -k option.
-t, --touch
Touch files (mark them up to date without really changing them) instead of running their commands. This is
used to pretend that the commands were done, in order to fool future invocations of make.
--trace
Information about the disposition of each target is printed (why the target is being rebuilt and what com‐
mands are run to rebuild it).
-v, --version
Print the version of the make program plus a copyright, a list of authors and a notice that there is no war‐
ranty.
-w, --print-directory
Print a message containing the working directory before and after other processing. This may be useful for
tracking down errors from complicated nests of recursive make commands.
--no-print-directory
Turn off -w, even if it was turned on implicitly.
--shuffle[=MODE]
Enable shuffling of goal and prerequisite ordering. MODE is one of none to disable shuffle mode, random to
shuffle prerequisites in random order, reverse to consider prerequisites in reverse order, or an integer
<seed> which enables random mode with a specific seed value. If MODE is omitted the default is random.
-W file, --what-if=file, --new-file=file, --assume-new=file
Pretend that the target file has just been modified. When used with the -n flag, this shows you what would
happen if you were to modify that file. Without -n, it is almost the same as running a touch command on the
given file before running make, except that the modification time is changed only in the imagination of
make.
--warn-undefined-variables
Warn when an undefined variable is referenced.
EXIT STATUS
GNU make exits with a status of zero if all makefiles were successfully parsed and no targets that were built
failed. A status of one will be returned if the -q flag was used and make determines that a target needs to be
rebuilt. A status of two will be returned if any errors were encountered.
SEE ALSO
The full documentation for make is maintained as a Texinfo manual. If the info and make programs are properly
installed at your site, the command
info make
should give you access to the complete manual.
BUGS
See the chapter ‘‘Problems and Bugs'' in The GNU Make Manual.
AUTHOR
This manual page contributed by Dennis Morse of Stanford University. Further updates contributed by Mike
Frysinger. It has been reworked by Roland McGrath. Maintained by Paul Smith.
COPYRIGHT
Copyright © 1992-1993, 1996-2022 Free Software Foundation, Inc. This file is part of GNU make.
GNU Make is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Li‐
cense as published by the Free Software Foundation; either version 3 of the License, or (at your option) any
later version.
GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more de‐
tails.
You should have received a copy of the GNU General Public License along with this program. If not, see
https://www.gnu.org/licenses/.
GNU 31 May 2022 MAKE(1)
NAME
make - GNU make utility to maintain groups of programs
SYNOPSIS
make [OPTION]... [TARGET]...
DESCRIPTION
The make utility will determine automatically which pieces of a large program need to be recompiled, and issue
the commands to recompile them. The manual describes the GNU implementation of make, which was written by
Richard Stallman and Roland McGrath, and is currently maintained by Paul Smith. Our examples show C programs,
since they are very common, but you can use make with any programming language whose compiler can be run with a
shell command. In fact, make is not limited to programs. You can use it to describe any task where some files
must be updated automatically from others whenever the others change.
To prepare to use make, you must write a file called the makefile that describes the relationships among files in
your program, and provides commands for updating each file. In a program, typically the executable file is up‐
dated from object files, which are in turn made by compiling source files.
Once a suitable makefile exists, each time you change some source files, this simple shell command:
make
suffices to perform all necessary recompilations. The make program uses the makefile description and the last-
modification times of the files to decide which of the files need to be updated. For each of those files, it is‐
sues the commands recorded in the makefile.
make executes commands in the makefile to update one or more targets, where target is typically a program. If no
-f option is present, make will look for the makefiles GNUmakefile, makefile, and Makefile, in that order.
Normally you should call your makefile either makefile or Makefile. (We recommend Makefile because it appears
prominently near the beginning of a directory listing, right near other important files such as README.) The
first name checked, GNUmakefile, is not recommended for most makefiles. You should use this name if you have a
makefile that is specific to GNU make, and will not be understood by other versions of make. If makefile is '-',
the standard input is read.
make updates a target if it depends on prerequisite files that have been modified since the target was last modi‐
fied, or if the target does not exist.
OPTIONS
-b, -m
These options are ignored for compatibility with other versions of make.
-B, --always-make
Unconditionally make all targets.
-C dir, --directory=dir
Change to directory dir before reading the makefiles or doing anything else. If multiple -C options are
specified, each is interpreted relative to the previous one: -C / -C etc is equivalent to -C /etc. This is
typically used with recursive invocations of make.
-d Print debugging information in addition to normal processing. The debugging information says which files
are being considered for remaking, which file-times are being compared and with what results, which files
actually need to be remade, which implicit rules are considered and which are applied---everything interest‐
ing about how make decides what to do.
--debug[=FLAGS]
Print debugging information in addition to normal processing. If the FLAGS are omitted, then the behavior
is the same as if -d was specified. FLAGS may be any or all of the following names, comma- or space-sepa‐
rated. Only the first character is significant: the rest may be omitted: all for all debugging output (same
as using -d), basic for basic debugging, verbose for more verbose basic debugging, implicit for showing im‐
plicit rule search operations, jobs for details on invocation of commands, makefile for debugging while re‐
making makefiles, print shows all recipes that are run even if they are silent, and why shows the reason
make decided to rebuild each target. Use none to disable all previous debugging flags.
-e, --environment-overrides
Give variables taken from the environment precedence over variables from makefiles.
-E string, --eval string
Interpret string using the eval function, before parsing any makefiles.
-f file, --file=file, --makefile=FILE
Use file as a makefile.
-i, --ignore-errors
Ignore all errors in commands executed to remake files.
-I dir, --include-dir=dir
Specifies a directory dir to search for included makefiles. If several -I options are used to specify sev‐
eral directories, the directories are searched in the order specified. Unlike the arguments to other flags
of make, directories given with -I flags may come directly after the flag: -Idir is allowed, as well as -I
dir. This syntax is allowed for compatibility with the C preprocessor's -I flag.
-j [jobs], --jobs[=jobs]
Specifies the number of jobs (commands) to run simultaneously. If there is more than one -j option, the
last one is effective. If the -j option is given without an argument, make will not limit the number of
jobs that can run simultaneously.
--jobserver-style=style
The style of jobserver to use. The style may be one of fifo, pipe, or sem (Windows only).
-k, --keep-going
Continue as much as possible after an error. While the target that failed, and those that depend on it,
cannot be remade, the other dependencies of these targets can be processed all the same.
-l [load], --load-average[=load]
Specifies that no new jobs (commands) should be started if there are others jobs running and the load aver‐
age is at least load (a floating-point number). With no argument, removes a previous load limit.
-L, --check-symlink-times
Use the latest mtime between symlinks and target.
-n, --just-print, --dry-run, --recon
Print the commands that would be executed, but do not execute them (except in certain circumstances).
-o file, --old-file=file, --assume-old=file
Do not remake the file file even if it is older than its dependencies, and do not remake anything on account
of changes in file. Essentially the file is treated as very old and its rules are ignored.
-O[type], --output-sync[=type]
When running multiple jobs in parallel with -j, ensure the output of each job is collected together rather
than interspersed with output from other jobs. If type is not specified or is target the output from the
entire recipe for each target is grouped together. If type is line the output from each command line within
a recipe is grouped together. If type is recurse output from an entire recursive make is grouped together.
If type is none output synchronization is disabled.
-p, --print-data-base
Print the data base (rules and variable values) that results from reading the makefiles; then execute as
usual or as otherwise specified. This also prints the version information given by the -v switch (see be‐
low). To print the data base without trying to remake any files, use make -p -f/dev/null.
-q, --question
‘‘Question mode''. Do not run any commands, or print anything; just return an exit status that is zero if
the specified targets are already up to date, nonzero otherwise.
-r, --no-builtin-rules
Eliminate use of the built-in implicit rules. Also clear out the default list of suffixes for suffix rules.
-R, --no-builtin-variables
Don't define any built-in variables.
-s, --silent, --quiet
Silent operation; do not print the commands as they are executed.
--no-silent
Cancel the effect of the -s option.
-S, --no-keep-going, --stop
Cancel the effect of the -k option.
-t, --touch
Touch files (mark them up to date without really changing them) instead of running their commands. This is
used to pretend that the commands were done, in order to fool future invocations of make.
--trace
Information about the disposition of each target is printed (why the target is being rebuilt and what com‐
mands are run to rebuild it).
-v, --version
Print the version of the make program plus a copyright, a list of authors and a notice that there is no war‐
ranty.
-w, --print-directory
Print a message containing the working directory before and after other processing. This may be useful for
tracking down errors from complicated nests of recursive make commands.
--no-print-directory
Turn off -w, even if it was turned on implicitly.
--shuffle[=MODE]
Enable shuffling of goal and prerequisite ordering. MODE is one of none to disable shuffle mode, random to
shuffle prerequisites in random order, reverse to consider prerequisites in reverse order, or an integer
<seed> which enables random mode with a specific seed value. If MODE is omitted the default is random.
-W file, --what-if=file, --new-file=file, --assume-new=file
Pretend that the target file has just been modified. When used with the -n flag, this shows you what would
happen if you were to modify that file. Without -n, it is almost the same as running a touch command on the
given file before running make, except that the modification time is changed only in the imagination of
make.
--warn-undefined-variables
Warn when an undefined variable is referenced.
EXIT STATUS
GNU make exits with a status of zero if all makefiles were successfully parsed and no targets that were built
failed. A status of one will be returned if the -q flag was used and make determines that a target needs to be
rebuilt. A status of two will be returned if any errors were encountered.
SEE ALSO
The full documentation for make is maintained as a Texinfo manual. If the info and make programs are properly
installed at your site, the command
info make
should give you access to the complete manual.
BUGS
See the chapter ‘‘Problems and Bugs'' in The GNU Make Manual.
AUTHOR
This manual page contributed by Dennis Morse of Stanford University. Further updates contributed by Mike
Frysinger. It has been reworked by Roland McGrath. Maintained by Paul Smith.
COPYRIGHT
Copyright © 1992-1993, 1996-2022 Free Software Foundation, Inc. This file is part of GNU make.
GNU Make is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Li‐
cense as published by the Free Software Foundation; either version 3 of the License, or (at your option) any
later version.
GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more de‐
tails.
You should have received a copy of the GNU General Public License along with this program. If not, see
https://www.gnu.org/licenses/.
GNU 31 May 2022 MAKE(1)