# Chinese Simplified translation about findutils
# Copyright (C) 2002, 2008 Free Software Foundation, Inc.
# This file is distributed under the same license as the findutils package.
# Wang Li <charles@linux.net.cn>, 2002.
# Ji ZhengYu <zhengyuji@gmail.com>, 2008, 2009, 2010, 2011, 2012, 2013
# Boyuan Yang <073plan@gmail.com>, 2018
msgid ""
msgstr ""
"Project-Id-Version: findutils-4.5.15\n"
"Report-Msgid-Bugs-To: bug-findutils@gnu.org\n"
"POT-Creation-Date: 2022-02-02 01:18+0100\n"
"PO-Revision-Date: 2018-09-23 19:14-0400\n"
"Last-Translator: Ji ZhengYu <zhengyuji@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 2.1.1\n"

#: find/exec.c:123
#, c-format
msgid "Failed to save working directory in order to run a command on %s"
msgstr "无法为在 %s 上运行命令而保存工作目录"

#: find/exec.c:243
#, c-format
msgid "Cannot close standard input"
msgstr "无法关闭标准输入"

#: find/exec.c:272
#, fuzzy, c-format
msgid "Failed to change directory%s%s"
msgstr "更改目录失败：%s"

#: find/exec.c:317 xargs/xargs.c:1322
msgid "cannot fork"
msgstr "无法 fork"

#: find/exec.c:348
#, c-format
msgid "error waiting for %s"
msgstr "等待 %s 时出错"

#: find/exec.c:357
#, c-format
msgid "%s terminated by signal %d"
msgstr "%s 由于信号 %d 而终止"

#: find/fstype.c:240
msgid "Cannot read mounted file system list"
msgstr "无法读取挂载文件系统列表"

#: find/fstype.c:270
msgid "unknown"
msgstr "未知"

#: find/ftsfind.c:231
#, c-format
msgid ""
"Symbolic link %s is part of a loop in the directory hierarchy; we have "
"already visited the directory to which it points."
msgstr ""
"符号链接 %s 是目录层级体系中一个循环的一部分；我们已经浏览过它所指向的目录。"

#: find/ftsfind.c:245
#, c-format
msgid ""
"File system loop detected; %s is part of the same file system loop as %s."
msgstr "探测到文件系统循环；%s 是与 %s 相同的文件系统循环的一部分。"

#: find/ftsfind.c:394 find/util.c:259
#, c-format
msgid "WARNING: file %s appears to have mode 0000"
msgstr "警告: 文件 %s 的权限看上去为 0000"

#: find/ftsfind.c:509
#, c-format
msgid "cannot search %s"
msgstr "无法查找 %s"

#: find/ftsfind.c:555
#, c-format
msgid "failed to restore working directory after searching %s"
msgstr "无法在查寻 %s 后还原工作目录"

#: find/ftsfind.c:582
#, c-format
msgid "extra operand %s"
msgstr ""

#: find/ftsfind.c:584
msgid "file operands cannot be combined with -files0-from"
msgstr ""

#: find/ftsfind.c:595
msgid ""
"option -files0-from reading from standard input cannot be combined with -ok, "
"-okdir"
msgstr ""

#: find/ftsfind.c:598
#, fuzzy
msgid "(standard input)"
msgstr "标准输出"

#: find/ftsfind.c:606
#, fuzzy, c-format
msgid "cannot open %s for reading"
msgstr "无法打开 /dev/tty 用于读取"

#: find/ftsfind.c:625
msgid ""
"option -files0-from: standard input must not refer to the same file when "
"combined with -ok, -okdir"
msgstr ""

#: find/ftsfind.c:668
#, fuzzy, c-format
msgid "%s: read error"
msgstr "标准错误"

#: find/ftsfind.c:695
msgid "invalid zero-length file name"
msgstr ""

#: find/ftsfind.c:719
#, fuzzy, c-format
msgid "error reading %s"
msgstr "从 %s 中读取单词时出错"

#: find/ftsfind.c:754
msgid "Failed to initialize shared-file hash table"
msgstr "初始化共享文件哈希表失败"

#: find/ftsfind.c:770 locate/frcode.c:222 locate/locate.c:1568
#: xargs/xargs.c:434
msgid "The atexit library function failed"
msgstr "atexit() 库函数失败"

#: find/parser.c:451
msgid ""
"The -delete action automatically turns on -depth, but -prune does nothing "
"when -depth is in effect.  If you want to carry on anyway, just explicitly "
"use the -depth option."
msgstr ""
"-delete 动作自动开启了 -depth 选项，但当 -depth 起作用时 -prune 就无效。若您"
"真想继续运行，就请写明使用 -depth 选项。"

#: find/parser.c:609
#, fuzzy, c-format
msgid ""
"warning: you have specified the global option %s after the argument %s, but "
"global options are not positional, i.e., %s affects tests specified before "
"it as well as those specified after it.  Please specify global options "
"before other arguments."
msgstr ""
"警告: 您在非选项参数 %2$s 后定义了 %1$s 选项，但选项不是位置选项 (%3$s 影响在"
"它之前或之后的指定的比较测试)。请在其它参数之前指定选项。\n"

#: find/parser.c:912
#, c-format
msgid ""
"warning: the -d option is deprecated; please use -depth instead, because the "
"latter is a POSIX-compliant feature."
msgstr ""
"警告: 不赞成使用 -d 选项；请使用 -depth 代替，因为后者更符合 POSIX 特性。"

#: find/parser.c:1167
#, c-format
msgid ""
"%s is not the name of an existing group and it does not look like a numeric "
"group ID because it has the unexpected suffix %s"
msgstr ""
"%s 不是已存在用户组的名称并且它看起来不像是个数字组 ID，因为它有个非预期的后"
"缀 %s"

#: find/parser.c:1182
#, c-format
msgid "%s is not the name of an existing group"
msgstr "%s 不是已存在用户组的名称"

#: find/parser.c:1188
msgid "argument to -group is empty, but should be a group name"
msgstr "-group 的参数列表为空，但应该给出一个用户组名"

#: find/parser.c:1261
msgid "sanity check of the fnmatch() library function failed."
msgstr "fnmatch() 库函数的健全性检测失败了。"

#: find/parser.c:1276
#, c-format
msgid ""
"warning: %s matches against basenames only, but the given pattern contains a "
"directory separator (%s), thus the expression will evaluate to false all the "
"time.  Did you mean %s?"
msgstr ""

#: find/parser.c:1399
#, c-format
msgid "Expected a positive decimal integer argument to %s, but got %s"
msgstr "本应对 %s 使用一个十进制的正整数作为参数，但却使用了 %s"

#: find/parser.c:1564
#, c-format
msgid "This system does not provide a way to find the birth time of a file."
msgstr "此系统未提供查找文件生成时间的方法。"

#: find/parser.c:1585
#, c-format
msgid "The %s test needs an argument"
msgstr "%s 测试需要参数"

#: find/parser.c:1622
#, c-format
msgid "I cannot figure out how to interpret %s as a date or time"
msgstr "我无法找到将 %s 解释为日期或时间的方法"

#: find/parser.c:1639
#, c-format
msgid "Cannot obtain birth time of file %s"
msgstr "无法获得文件 %s 的生成时间"

#: find/parser.c:1783
#, c-format
msgid "warning: -%s %s will not match anything because it ends with /."
msgstr "警告: -%s 由于 %s 以 / 结尾因此无法匹配任何内容。"

#: find/parser.c:1878
#, c-format
msgid "invalid mode %s"
msgstr "非法权限 %s"

#: find/parser.c:1896
#, c-format
msgid ""
"warning: you have specified a mode pattern %s (which is equivalent to /000). "
"The meaning of -perm /000 has now been changed to be consistent with -perm "
"-000; that is, while it used to match no files, it now matches all files."
msgstr ""
"警告: 您已经指定了一个权限字串 %s(它等同于 /000)。-perm /000 的意思现在已被更"
"改至与 -perm 000 一致了；那即是说，以前它不匹配任何文件，而现在它匹配所有文"
"件。"

#: find/parser.c:2069
#, fuzzy, c-format
msgid "failed to compile regular expression '%s': %s"
msgstr "无效的常规表达式"

#: find/parser.c:2098
msgid "invalid null argument to -size"
msgstr "-size 的 null 参数无效"

#: find/parser.c:2148
#, c-format
msgid "invalid -size type `%c'"
msgstr "无效的 -size 类型“%c”"

#: find/parser.c:2158
#, c-format
msgid "Invalid argument `%s%s' to -size"
msgstr "-size 的参数 `%s%s'无效"

#: find/parser.c:2340
msgid ""
"The -show-control-chars option takes a single argument which must be "
"'literal' or 'safe'"
msgstr "-show-control-chars 选项仅带一个参数，它必须是‘literal’或‘safe’"

#: find/parser.c:2454
#, c-format
msgid "Invalid argument %s to -used"
msgstr "-used 的参数 %s 无效"

#: find/parser.c:2495
#, c-format
msgid "%s is not the name of a known user"
msgstr "用户名 %s 未知"

#: find/parser.c:2502
msgid "The argument to -user should not be empty"
msgstr "-user 选项的参数不可以为空"

#: find/parser.c:2527
#, c-format
msgid "Features enabled: "
msgstr "开启的特性: "

#: find/parser.c:2588
msgid "invalid predicate -context: SELinux is not enabled."
msgstr "-context 中的文本内容非法: SELinux 未开启。"

#: find/parser.c:2652
#, fuzzy, c-format
msgid "Arguments to %s should contain at least one letter"
msgstr "-type 的参数应当仅包含一个字母"

#: find/parser.c:2717
#, fuzzy, c-format
msgid ""
"%s %c is not supported because symbolic links are not supported on the "
"platform find was compiled on."
msgstr "-type %c 不受支持，因 find 编译时所用平台不支持符号链接。"

#: find/parser.c:2729
#, fuzzy, c-format
msgid ""
"%s %c is not supported because FIFOs are not supported on the platform find "
"was compiled on."
msgstr "-type %c 不受支持，因 find 编译时所用平台不支持 FIFO。"

#: find/parser.c:2741
#, fuzzy, c-format
msgid ""
"%s %c is not supported because named sockets are not supported on the "
"platform find was compiled on."
msgstr "-type %c 不受支持，因 find 编译时所用平台不支持命名套接字。"

#: find/parser.c:2757
#, fuzzy, c-format
msgid ""
"%s %c is not supported because Solaris doors are not supported on the "
"platform find was compiled on."
msgstr "-type %c 不受支持，因 find 编译时所用平台不支持 Solaris 门（door）。"

#: find/parser.c:2765
#, fuzzy, c-format
msgid "Unknown argument to %s: %c"
msgstr "-type 的参数未知：%c"

#: find/parser.c:2773
#, c-format
msgid "Duplicate file type '%c' in the argument list to %s."
msgstr ""

#: find/parser.c:2789
#, c-format
msgid "Must separate multiple arguments to %s using: ','"
msgstr ""

#: find/parser.c:2798
#, c-format
msgid ""
"Last file type in list argument to %s is missing, i.e., list is ending on: "
"','"
msgstr ""

#: find/parser.c:2857
#, c-format
msgid ""
"The current directory is included in the PATH environment variable, which is "
"insecure in combination with the %s action of find.  Please remove the "
"current directory from your $PATH (that is, remove \".\", doubled colons, or "
"leading or trailing colons)"
msgstr ""
"当前目录包含在了 PATH 环境变量中，与 find 的 %s 动作合用时不安全。请从您的 "
"$PATH 变量中删除当前目录(即删除“.”，冒号或其前后的东西)"

#: find/parser.c:2869
#, c-format
msgid ""
"The relative path %s is included in the PATH environment variable, which is "
"insecure in combination with the %s action of find.  Please remove that "
"entry from $PATH"
msgstr ""
"相对路径 %s 包含在了 PATH 环境变量中，与 find 的 %s 动作合用时不安全。请从 "
"$PATH 变量中删除那个条目"

#: find/parser.c:2980
msgid ""
"You may not use {} within the utility name for -execdir and -okdir, because "
"this is a potential security problem."
msgstr "您不可以在 -execdir 和 -okdir 中使用 {}，因为这会带来潜在的安全问题。"

#: find/parser.c:3006
#, c-format
msgid "Only one instance of {} is supported with -exec%s ... +"
msgstr "-exec%s ... + 仅支持一个 {} 实例"

#: find/parser.c:3016
#, c-format
msgid "In %s the %s must appear by itself, but you specified %s"
msgstr "%s 中%s 默认调用自身，但您指定了%s"

#: find/parser.c:3035
msgid "The environment is too large for exec()."
msgstr "对 exec() 操作来说执行环境过大。"

#: find/parser.c:3204
#, c-format
msgid "arithmetic overflow while converting %s days to a number of seconds"
msgstr "将 %s 天换算为秒数时出现算术溢出"

#: find/parser.c:3228
msgid "arithmetic overflow when trying to calculate the end of today"
msgstr "尝试计算本日终止时刻时出现算术溢出"

#: find/parser.c:3387
msgid "standard error"
msgstr "标准错误"

#: find/parser.c:3392
msgid "standard output"
msgstr "标准输出"

#: find/pred.c:260
#, c-format
msgid "cannot delete %s"
msgstr "无法删除 %s"

#: find/pred.c:650
#, c-format
msgid "WARNING: cannot determine birth time of file %s"
msgstr "警告: 无法确定文件 %s 的生成时间"

#: find/pred.c:698
#, c-format
msgid "< %s ... %s > ? "
msgstr "< %s ... %s > ? "

#: find/pred.c:700
msgid "Failed to write prompt for -ok"
msgstr "无法为 -ok 写入提示符"

#: find/pred.c:1173 find/print.c:1238
#, c-format
msgid "getfilecon failed: %s"
msgstr "getfilecon 失败：%s"

#: find/print.c:335
#, c-format
msgid "warning: escape `\\' followed by nothing at all"
msgstr "警告：转义“\\”字符后未跟随任何其它字符"

#: find/print.c:354
#, c-format
msgid "warning: unrecognized escape `\\%c'"
msgstr "警告：无法识别的转义字符“\\%c”"

#: find/print.c:374 find/print.c:1260
#, c-format
msgid "error: %s at end of format string"
msgstr "错误: %s 位于格式字符串的末尾"

#: find/print.c:398
#, c-format
msgid "error: the format directive `%%%c' is reserved for future use"
msgstr "错误: 格式指令‘%%%c’是留给将来使用的。"

#: find/print.c:406
#, c-format
msgid ""
"warning: format directive `%%%c' should be followed by another character"
msgstr "警告: 格式命令 `%%%c' 应该后跟另一个字符"

#: find/print.c:414
#, c-format
msgid "warning: unrecognized format directive `%%%c'"
msgstr "警告：不可识别的格式指令“%%%c”"

#: find/tree.c:115 find/tree.c:120 find/tree.c:226 find/tree.c:265
msgid "invalid expression"
msgstr "非法表达式"

#: find/tree.c:126
#, c-format
msgid ""
"invalid expression; you have used a binary operator '%s' with nothing before "
"it."
msgstr "非法表达式；您在一个二元操作符‘%s’前未带任何东西。"

#: find/tree.c:135 find/tree.c:194
#, fuzzy, c-format
msgid ""
"invalid expression: expected expression before closing parentheses '%s'."
msgstr "非法表达式；不允许使用空白的圆括号。"

#: find/tree.c:145
#, c-format
msgid "expected an expression between '%s' and ')'"
msgstr "在‘%s’和‘)’之间需要一个表达式"

#: find/tree.c:155
#, c-format
msgid "expected an expression after '%s'"
msgstr "在‘%s’后需要一个表达式"

#: find/tree.c:160
msgid "invalid expression; you have too many ')'"
msgstr "非法表达式；您使用了太多的‘)’"

#: find/tree.c:183
#, fuzzy, c-format
msgid ""
"invalid expression; expected to find a ')' but didn't see one. Perhaps you "
"need an extra predicate after '%s'"
msgstr "非法表达式；需要一个‘)’但未找到。也许您需要在‘%s’后加上额外的判定"

#: find/tree.c:198
msgid "invalid expression; empty parentheses are not allowed."
msgstr "非法表达式；不允许使用空白的圆括号。"

#: find/tree.c:204
msgid ""
"invalid expression; I was expecting to find a ')' somewhere but did not see "
"one."
msgstr "非法表达式；我原来希望能在某处找到‘)’，但未找到。"

#: find/tree.c:211 find/tree.c:835
msgid "oops -- invalid expression type!"
msgstr "哎呀 -- 无效的表达式类型！"

#: find/tree.c:283
#, c-format
msgid "oops -- invalid expression type (%d)!"
msgstr "哎 -- 无效的表达式类型(%d)！"

#: find/tree.c:1112
#, c-format
msgid ""
"warning: there is no entry in the predicate evaluation cost table for "
"predicate %s; please report this as a bug"
msgstr ""
"警告: predicate %s 中没有predicate evaluation cost table 的项目; 请上报 bug"

#: find/tree.c:1286
#, fuzzy, c-format
msgid "paths must precede expression: `%s'"
msgstr "路径必须在表达式之前: %s"

#: find/tree.c:1288
#, c-format
msgid "possible unquoted pattern after predicate `%s'?"
msgstr ""

#: find/tree.c:1298
#, c-format
msgid "unknown predicate `%s'"
msgstr "未知的断言“%s”"

#: find/tree.c:1318
#, c-format
msgid "invalid predicate `%s'"
msgstr "无效断言“%s”"

#: find/tree.c:1322
#, c-format
msgid "invalid argument `%s' to `%s'"
msgstr "“%2$s”的无效参数“%1$s”"

#: find/tree.c:1329
#, c-format
msgid "missing argument to `%s'"
msgstr "遗漏“%s”的参数"

#: find/tree.c:1405
msgid "you have too many ')'"
msgstr "您使用了太多的‘)’"

#: find/tree.c:1411
#, c-format
msgid "unexpected extra predicate '%s'"
msgstr "非预期的无效断言“%s”"

#: find/tree.c:1413
msgid "unexpected extra predicate"
msgstr "非预期的无效断言"

#: find/tree.c:1534
msgid "oops -- invalid default insertion of and!"
msgstr "哎 -- 无效的默认插入！"

#: find/util.c:139
#, fuzzy
msgid "Valid arguments for -D:\n"
msgstr "合法的参数为:"

#: find/util.c:163 locate/frcode.c:142 locate/locate.c:1365 xargs/xargs.c:1702
#, c-format
msgid "Try '%s --help' for more information.\n"
msgstr ""

#: find/util.c:169
#, fuzzy, c-format
msgid ""
"Usage: %s [-H] [-L] [-P] [-Olevel] [-D debugopts] [path...] [expression]\n"
msgstr "用法: %s [-H] [-L] [-P] [-Olevel] [-D "

#: find/util.c:173
#, fuzzy
msgid ""
"\n"
"Default path is the current directory; default expression is -print.\n"
"Expression may consist of: operators, options, tests, and actions.\n"
msgstr ""
"\n"
"默认路径为当前目录；默认表达式为 -print\n"
"表达式可能由下列成份组成：操作符、选项、测试表达式以及动作：\n"

#: find/util.c:176
#, fuzzy
msgid ""
"\n"
"Operators (decreasing precedence; -and is implicit where no others are "
"given):\n"
"      ( EXPR )   ! EXPR   -not EXPR   EXPR1 -a EXPR2   EXPR1 -and EXPR2\n"
"      EXPR1 -o EXPR2   EXPR1 -or EXPR2   EXPR1 , EXPR2\n"
msgstr ""
"操作符 (优先级递减；未做任何指定时默认使用 -and):\n"
"      ( EXPR )   ! EXPR   -not EXPR   EXPR1 -a EXPR2   EXPR1 -and EXPR2\n"
"      EXPR1 -o EXPR2   EXPR1 -or EXPR2   EXPR1 , EXPR2\n"

#: find/util.c:180
msgid ""
"\n"
"Positional options (always true):\n"
"      -daystart -follow -nowarn -regextype -warn\n"
msgstr ""

#: find/util.c:183
#, fuzzy
msgid ""
"\n"
"Normal options (always true, specified before other expressions):\n"
"      -depth -files0-from FILE -maxdepth LEVELS -mindepth LEVELS\n"
"       -mount -noleaf -xdev -ignore_readdir_race -noignore_readdir_race\n"
msgstr ""
"位置选项 (总是真): -daystart -follow -regextype\n"
"\n"
"普通选项 (总是真，在其它表达式前指定):\n"
"      -depth --help -maxdepth LEVELS -mindepth LEVELS -mount -noleaf\n"
"      --version -xdev -ignore_readdir_race -noignore_readdir_race\n"

#: find/util.c:187
#, fuzzy
msgid ""
"\n"
"Tests (N can be +N or -N or N):\n"
"      -amin N -anewer FILE -atime N -cmin N -cnewer FILE -context CONTEXT\n"
"      -ctime N -empty -false -fstype TYPE -gid N -group NAME -ilname "
"PATTERN\n"
"      -iname PATTERN -inum N -iwholename PATTERN -iregex PATTERN\n"
"      -links N -lname PATTERN -mmin N -mtime N -name PATTERN -newer FILE\n"
"      -nouser -nogroup -path PATTERN -perm [-/]MODE -regex PATTERN\n"
"      -readable -writable -executable\n"
"      -wholename PATTERN -size N[bcwkMG] -true -type [bcdpflsD] -uid N\n"
"      -used N -user NAME -xtype [bcdpfls]\n"
msgstr ""
"比较测试 (N 可以是 +N 或 -N 或 N): -amin N -anewer FILE -atime N -cmin N\n"
"      -cnewer 文件 -ctime N -empty -false -fstype 类型 -gid N -group 名称\n"
"      -ilname 匹配模式 -iname 匹配模式 -inum N -ipath 匹配模式 -iregex 匹配模"
"式\n"
"      -links N -lname 匹配模式 -mmin N -mtime N -name 匹配模式 -newer 文件"

#: find/util.c:197
#, fuzzy
msgid ""
"\n"
"Actions:\n"
"      -delete -print0 -printf FORMAT -fprintf FILE FORMAT -print \n"
"      -fprint0 FILE -fprint FILE -ls -fls FILE -prune -quit\n"
"      -exec COMMAND ; -exec COMMAND {} + -ok COMMAND ;\n"
"      -execdir COMMAND ; -execdir COMMAND {} + -okdir COMMAND ;\n"
msgstr ""
"\n"
"操作: -delete -print0 -printf 格式 -fprintf 文件 格式 -print \n"
"      -fprint0 文件 -fprint 文件 -ls -fls 文件 -prune -quit\n"
"      -exec 命令 ; -exec 命令 {} + -ok 命令 ;\n"
"      -execdir 命令 ; -execdir 命令 {} + -okdir 命令 ;\n"

#: find/util.c:204
msgid ""
"\n"
"Other common options:\n"
msgstr ""

#: find/util.c:206 xargs/xargs.c:1751
msgid "      --help                   display this help and exit\n"
msgstr "      --help                   显示此帮助信息并退出\n"

#: find/util.c:207 xargs/xargs.c:1752
#, fuzzy
msgid ""
"      --version                output version information and exit\n"
"\n"
msgstr "      --version                输出版本信息并退出\n"

#: find/util.c:210
msgid ""
"\n"
"Use '-D help' for a description of the options, or see find(1)\n"
"\n"
msgstr ""

#: find/util.c:475
#, fuzzy, c-format
msgid "Failed to save initial working directory%s%s"
msgstr "无法保存初始工作目录：%s"

#: find/util.c:494
#, fuzzy, c-format
msgid "Failed to restore initial working directory%s%s"
msgstr "无法回复初始工作目录：%s"

#: find/util.c:832
#, c-format
msgid "Ignoring unrecognised debug flag %s"
msgstr "忽略不可识别的调试标记 %s"

#: find/util.c:839
#, c-format
msgid "Empty argument to the -D option."
msgstr "-D 选项的参数列表为空"

#: find/util.c:856
msgid "The -O option must be immediately followed by a decimal integer"
msgstr "-O 选项后面必须立即带上一个十进制整数"

#: find/util.c:866 find/util.c:877
msgid "Please specify a decimal number immediately after -O"
msgstr "请在 -O 选项后面立即指定一个十进制数"

#: find/util.c:882 find/util.c:887
#, c-format
msgid "Invalid optimisation level %s"
msgstr "无效的优化等级 %s"

#: find/util.c:895
#, c-format
msgid ""
"Optimisation level %lu is too high.  If you want to find files very quickly, "
"consider using GNU locate."
msgstr "优化级别 %lu 太高了。如果您想很快地找到文件，考虑使用 GNU locate。"

#: find/util.c:941
#, fuzzy, c-format
msgid "Missing argument after the -D option."
msgstr "-D 选项的参数列表为空"

#: find/util.c:1044
msgid ""
"The environment variable FIND_BLOCK_SIZE is not supported, the only thing "
"that affects the block size is the POSIXLY_CORRECT environment variable"
msgstr ""
"不支持环境变量 FIND_BLOCK_SIZE，仅环境变量 POSIXLY_CORRECT 会影响块大小"

#: lib/bugreports.c:28
#, fuzzy, c-format
msgid ""
"Please see also the documentation at %s.\n"
"You can report (and track progress on fixing) bugs in the \"%s\"\n"
"program via the %s bug-reporting page at\n"
"%s or, if\n"
"you have no web access, by sending email to <%s>.\n"
msgstr ""
"通过 findutils 错误报告页 http://savannah.gnu.org/ 报告错误及跟踪修定过程。如"
"果您无法浏览网页，请发电子邮件至 <bug-findutils@gnu.org>。"

#: lib/buildcmd.c:144
msgid "command too long"
msgstr "命令过长"

#: lib/buildcmd.c:284
msgid "can't call exec() due to argument size restrictions"
msgstr "由于参数数量限制，无法调用 exec()"

#: lib/buildcmd.c:349
msgid "cannot fit single argument within argument list size limit"
msgstr "无法在参数列表大小限制中适配单一参数"

#: lib/buildcmd.c:355
msgid "argument list too long"
msgstr "参数列表过长"

#: lib/buildcmd.c:612
#, c-format
msgid "Environment variable %s is not set to a valid decimal number"
msgstr "环境变量 %s 未设为一个有效十进制数"

#: lib/fdleak.c:391
#, c-format
msgid ""
"File descriptor %d will leak; please report this as a bug, remembering to "
"include a detailed description of the simplest way to reproduce this problem."
msgstr ""
"文件描述符 %d 泄漏; 请上报 bug，记得带上重现这一问题的最简方法的详细说明。"

#: lib/findutils-version.c:49
msgid "Eric B. Decker"
msgstr "Eric B. Decker"

#: lib/findutils-version.c:50
msgid "James Youngman"
msgstr "James Youngman"

#: lib/findutils-version.c:51
msgid "Kevin Dalley"
msgstr "Kevin Dalley"

#: lib/listfile.c:454
#, c-format
msgid "Failed to write output (at stage %d)"
msgstr "无法写入输出（在第 %d 步中）"

#: lib/regextype.c:98
#, c-format
msgid "Unknown regular expression type %s; valid types are %s."
msgstr "未知的正则表达式类型 %s；合法的类型是 %s。"

#: lib/safe-atoi.c:68
#, c-format
msgid "Unexpected suffix %s on %s"
msgstr "在 %2$s 中有非预期的后缀 %1$s"

#: lib/safe-atoi.c:74
#, c-format
msgid "Expected an integer: %s"
msgstr "需要一个整数: %s"

#: locate/frcode.c:147
#, c-format
msgid "Usage: %s [-0 | --null] [--version] [--help]\n"
msgstr "用法: %s [-0 | --null] [--version] [--help]\n"

#: locate/frcode.c:169
msgid "You need to specify a security level as a decimal integer."
msgstr "您需要以十进制整数指定一个安全级别"

#: locate/frcode.c:177
#, c-format
msgid "Security level %s is outside the convertible range."
msgstr "安全级 %s 超出可转换范围"

#: locate/frcode.c:185
#, c-format
msgid "Security level %s has unexpected suffix %s."
msgstr "安全级 %s 有非预期的后缀 %s。"

#: locate/frcode.c:199
msgid "write error"
msgstr "写入错误"

#: locate/frcode.c:246
#, c-format
msgid "slocate security level %ld is unsupported."
msgstr "不支持 slocate 安全级 %ld。"

#: locate/frcode.c:265
#, fuzzy, c-format
msgid "no argument expected."
msgstr "-type 的参数未知：%c"

#: locate/frcode.c:282
msgid "Failed to write to standard output"
msgstr "无法写入标准输出"

#: locate/frcode.c:291
#, c-format
msgid "The input file should end with the delimiter"
msgstr ""

#: locate/locate.c:112
msgid "days"
msgstr "天"

#: locate/locate.c:160
msgid "The argument for option --max-database-age must not be empty"
msgstr "--max-database-age 选项的参数不允为空"

#: locate/locate.c:176 locate/locate.c:183
#, c-format
msgid "Invalid argument %s for option --max-database-age"
msgstr "--max-database-age 选项的参数 %s 无效"

#: locate/locate.c:433
#, c-format
msgid "locate database %s contains a filename longer than locate can handle"
msgstr "locate 数据库 %s 包含一个比 locate 所能处理的文件名更长的文件名`"

#: locate/locate.c:544 locate/locate.c:563
#, c-format
msgid "locate database %s is corrupt or invalid"
msgstr "locate 数据库 %s 损坏或无效"

#: locate/locate.c:848
#, c-format
msgid "Database was last modified at %s.%09ld"
msgstr "数据库最近一次修改时间为 %s.%09ld"

#: locate/locate.c:856
#, c-format
msgid "Locate database size: %s byte\n"
msgid_plural "Locate database size: %s bytes\n"
msgstr[0] "Locate 数据库大小: %s 字节\n"

#: locate/locate.c:862
#, c-format
msgid "Matching Filenames: %s\n"
msgstr "正在匹配文件名: %s\n"

#: locate/locate.c:863
#, c-format
msgid "All Filenames: %s\n"
msgstr "所有文件名: %s\n"

#: locate/locate.c:869
#, c-format
msgid ""
"File names have a cumulative length of %s bytes.\n"
"Of those file names,\n"
"\n"
"\t%s contain whitespace, \n"
"\t%s contain newline characters, \n"
"\tand %s contain characters with the high bit set.\n"
msgstr ""
"文件名累计长度 %s 字节。\n"
"在那些文件名中，\n"
"\n"
"\t包括空格 %s 个，\n"
"\t空行 %s 个，\n"
"\t以及带有高字节位设置的字符 %s 个。\n"

#: locate/locate.c:883
#, c-format
msgid ""
"Some filenames may have been filtered out, so we cannot compute the "
"compression ratio.\n"
msgstr "某些文件名可能被过滤掉了，因此我们无法计算压缩率。\n"

#: locate/locate.c:896
#, c-format
msgid "Compression ratio %4.2f%% (higher is better)\n"
msgstr "压缩率 %4.2f%%（越高越好）\n"

#: locate/locate.c:903
#, c-format
msgid "Compression ratio is undefined\n"
msgstr "压缩率未定义\n"

#: locate/locate.c:958
#, c-format
msgid ""
"locate database %s looks like an slocate database but it seems to have "
"security level %c, which GNU findutils does not currently support"
msgstr ""
"locate 数据库 %s 看上去像是个 slocate 数据库，但它好像有安全级 %c，而目前 "
"GNU findutils 不支持此安全级"

#: locate/locate.c:1080
#, c-format
msgid ""
"%s is an slocate database of unsupported security level %d; skipping it."
msgstr "%s 是一个不支持的安全级为 %d 的 slocate 数据库；跳过。"

#: locate/locate.c:1097
#, c-format
msgid ""
"You specified the -E option, but that option cannot be used with slocate-"
"format databases with a non-zero security level.  No results will be "
"generated for this database.\n"
msgstr ""
"您指定了 -E 选项，但那个选项无法和带非零安全级的 slocate 格式的数据库一同使"
"用。此数据库不会生成任何结果。\n"

#: locate/locate.c:1108
#, c-format
msgid "%s is an slocate database.  Turning on the '-e' option."
msgstr "%s 是一个 slocate 数据库。开启‘-e’选项。"

#: locate/locate.c:1146
#, c-format
msgid "Old-format locate database %s is too short to be valid"
msgstr "旧格式的 locate 数据库 %s 太短因而无效"

#: locate/locate.c:1298
#, c-format
msgid "Database %s is in the %s format.\n"
msgstr "数据库 %s 的格式为 %s。\n"

#: locate/locate.c:1325
msgid "The database has little-endian machine-word encoding.\n"
msgstr "数据库是 little-endian 编码的。\n"

#: locate/locate.c:1327
msgid "The database has big-endian machine-word encoding.\n"
msgstr "数据库是 big-endian 编码的。\n"

#: locate/locate.c:1340
#, c-format
msgid "The database machine-word encoding order is not obvious.\n"
msgstr "数据库编码方式不明显。\n"

#: locate/locate.c:1369
#, c-format
msgid ""
"Usage: %s [-d path | --database=path] [-e | -E | --[non-]existing]\n"
"      [-i | --ignore-case] [-w | --wholename] [-b | --basename] \n"
"      [--limit=N | -l N] [-S | --statistics] [-0 | --null] [-c | --count]\n"
"      [-P | -H | --nofollow] [-L | --follow] [-m | --mmap] [-s | --stdio]\n"
"      [-A | --all] [-p | --print] [-r | --regex] [--regextype=TYPE]\n"
"      [--max-database-age D] [--version] [--help]\n"
"      pattern...\n"
msgstr ""
"用法: %s [-d path | --database=path] [-e | -E | --[non-]existing]\n"
"      [-i | --ignore-case] [-w | --wholename] [-b | --basename] \n"
"      [--limit=N | -l N] [-S | --statistics] [-0 | --null] [-c | --count]\n"
"      [-P | -H | --nofollow] [-L | --follow] [-m | --mmap ] [ -s | --"
"stdio ]\n"
"      [-A | --all] [-p | --print] [-r | --regex ] [--regextype=TYPE]\n"
"      [--max-database-age D] [--version] [--help]\n"
"      pattern...\n"

#: locate/locate.c:1435
msgid "failed to drop group privileges"
msgstr "无法放弃组特权"

#: locate/locate.c:1453
msgid "failed to drop setuid privileges"
msgstr "无法放弃 setuid 特权"

#: locate/locate.c:1467
msgid "Failed to fully drop privileges"
msgstr "无法完全放弃特权"

#: locate/locate.c:1485
msgid "failed to drop setgid privileges"
msgstr "无法放弃 setgid 特权"

#: locate/locate.c:1722
#, c-format
msgid "pattern argument expected"
msgstr ""

#: locate/locate.c:1763
#, c-format
msgid "warning: the locate database can only be read from stdin once."
msgstr "警告：locate 数据库仅能从标准输入读取一次。"

#: locate/locate.c:1836
#, c-format
msgid "time system call failed"
msgstr "时间系统调用失败"

#: locate/locate.c:1847
#, fuzzy, c-format
msgid "warning: database %s is more than %u %s old (actual age is %.1f %s)"
msgstr "警告: 数据库“%s”比 %d %s 还陈旧(实际时间 %.1f %s)"

#: locate/word_io.c:77
#, c-format
msgid "WARNING: locate database %s was built with a different byte order"
msgstr "警告: locate 数据库 %s 以不同的字节顺序构建"

#: locate/word_io.c:123
#, c-format
msgid "unexpected EOF in %s"
msgstr "在 %s 中有非预期的 EOF"

#: locate/word_io.c:126
#, c-format
msgid "error reading a word from %s"
msgstr "从 %s 中读取单词时出错"

#: xargs/xargs.c:254
#, c-format
msgid "Invalid escape sequence %s in input delimiter specification."
msgstr "在输入分隔定义中有无效转义序列 %s。"

#: xargs/xargs.c:272
#, c-format
msgid ""
"Invalid escape sequence %s in input delimiter specification; character "
"values must not exceed %lx."
msgstr "在输入分隔定义中有无效的转义序列 %s；字符值不能超过 %lx。"

#: xargs/xargs.c:279
#, c-format
msgid ""
"Invalid escape sequence %s in input delimiter specification; character "
"values must not exceed %lo."
msgstr "在输入分隔定义中有无效的转义序列 %s；字符值不能超过 %lo。"

#: xargs/xargs.c:289
#, c-format
msgid ""
"Invalid escape sequence %s in input delimiter specification; trailing "
"characters %s not recognised."
msgstr "在输入分隔定义中有无效的转义序列 %s；不可识别后续字符 %s。"

#: xargs/xargs.c:335
#, c-format
msgid ""
"Invalid input delimiter specification %s: the delimiter must be either a "
"single character or an escape sequence starting with \\."
msgstr ""
"无效的输入分隔定义 %s: 分隔符要么是单一字符要么是以 \\ 开始的转义序列。"

#: xargs/xargs.c:354
msgid "environment is too large for exec"
msgstr "对 exec 来说环境过大"

#: xargs/xargs.c:391
#, c-format
msgid ""
"warning: options %s and %s are mutually exclusive, ignoring previous %s value"
msgstr ""

#: xargs/xargs.c:636
#, c-format
msgid "warning: value %ld for -s option is too large, using %ld instead"
msgstr "警告: -s 选项的值 %ld 太大了，用 %ld 代替"

#: xargs/xargs.c:687
#, c-format
msgid "option --%s may not be set to a value which includes `='"
msgstr "选项 --%s 不要设置成带`=' 的值"

#: xargs/xargs.c:699
#, c-format
msgid "failed to unset environment variable %s"
msgstr "无法撤消环境变量 %s"

#: xargs/xargs.c:712
#, c-format
msgid "warning: the -E option has no effect if -0 or -d is used.\n"
msgstr "警告：-E 选项在使用了 -0 或 -d 选项时不生效。\n"

#: xargs/xargs.c:734
#, c-format
msgid "Cannot set SIGUSR1 signal handler"
msgstr "无法设置 SIGUSR1 信号句柄"

#: xargs/xargs.c:740
#, c-format
msgid "Cannot set SIGUSR2 signal handler"
msgstr "无法设置 SIGUSR2 信号句柄"

#: xargs/xargs.c:756
#, c-format
msgid "Cannot open input file %s"
msgstr "无法打开输入文件 %s"

#: xargs/xargs.c:775
#, c-format
msgid "Your environment variables take up %<PRIuMAX> bytes\n"
msgstr "您的环境变量占有 %<PRIuMAX> 个字节\n"

#: xargs/xargs.c:778
#, c-format
msgid "POSIX upper limit on argument length (this system): %<PRIuMAX>\n"
msgstr "此系统的参数长度 POSIX 上限: %<PRIuMAX>\n"

#: xargs/xargs.c:781
#, c-format
msgid ""
"POSIX smallest allowable upper limit on argument length (all systems): "
"%<PRIuMAX>\n"
msgstr "所有系统中所允许的最小参数长度 POSIX 上限: %<PRIuMAX>\n"

#: xargs/xargs.c:784
#, c-format
msgid "Maximum length of command we could actually use: %<PRIuMAX>\n"
msgstr "我们实际能用的最大命令长度: %<PRIuMAX>\n"

#: xargs/xargs.c:787
#, c-format
msgid "Size of command buffer we are actually using: %<PRIuMAX>\n"
msgstr "我们实际能用的命令缓冲区的大小: %<PRIuMAX>\n"

#: xargs/xargs.c:790
#, c-format
msgid "Maximum parallelism (--max-procs must be no greater): %<PRIuMAX>\n"
msgstr "最大并行数（--max-procs 不得大于该值）：%<PRIuMAX>\n"

#: xargs/xargs.c:796
#, c-format
msgid ""
"\n"
"Execution of xargs will continue now, and it will try to read its input and "
"run commands; if this is not what you wanted to happen, please type the end-"
"of-file keystroke.\n"
msgstr ""
"\n"
"xargs 中的命令现在将继续执行，并且它会尝试读取输入并运行命令；如果您不想它发"
"生，请按下“文件结束”按键(ctrl-D)。\n"

#: xargs/xargs.c:804
#, c-format
msgid ""
"Warning: %s will be run at least once.  If you do not want that to happen, "
"then press the interrupt keystroke.\n"
msgstr "警告: %s 将至少运行一次。如果您不想它发生，请按下中断按键。(ctrl-C)\n"

#: xargs/xargs.c:933 xargs/xargs.c:1028
#, c-format
msgid ""
"unmatched %s quote; by default quotes are special to xargs unless you use "
"the -0 option"
msgstr ""
"未匹配的 %s 引用；默认情况下，引用是针对 xargs 的，除非您使用了 -0 选项"

#: xargs/xargs.c:935 xargs/xargs.c:1030
msgid "double"
msgstr "双"

#: xargs/xargs.c:935 xargs/xargs.c:1030
msgid "single"
msgstr "单"

#: xargs/xargs.c:1049
#, c-format
msgid ""
"WARNING: a NUL character occurred in the input.  It cannot be passed through "
"in the argument list.  Did you mean to use the --null option?"
msgstr ""
"警告: 输入中有个 NUL 字符。它不能在参数列表中传送。您是想用 --null 选项吗？"

#: xargs/xargs.c:1059 xargs/xargs.c:1124
msgid "argument line too long"
msgstr "参数行过长"

#: xargs/xargs.c:1146 xargs/xargs.c:1163
msgid "Failed to write to stderr"
msgstr "无法写入标准输出"

#: xargs/xargs.c:1159
msgid "failed to open /dev/tty for reading"
msgstr "无法打开 /dev/tty 用于读取"

#: xargs/xargs.c:1169
msgid "Failed to read from stdin"
msgstr "无法从标准输入读取"

#: xargs/xargs.c:1205
#, c-format
msgid "failed to set environment variable %s"
msgstr "无法设置环境变量 %s"

#: xargs/xargs.c:1259
msgid "failed to redirect standard input of the child process"
msgstr ""

#: xargs/xargs.c:1311
msgid "could not create pipe before fork"
msgstr "无法在派生子进程之前创建管道"

#: xargs/xargs.c:1382
#, c-format
msgid ""
"errno-buffer safe_read failed in xargs_do_exec (this is probably a bug, "
"please report it)"
msgstr ""
"xargs_do_exec 中的 errno-buffer safe_read 失败（这可能是个 bug，请报告给我"
"们）"

#: xargs/xargs.c:1435
#, fuzzy, c-format
msgid ""
"read returned unexpected value %<PRIuMAX>; this is probably a bug, please "
"report it"
msgstr "读取操作返回的是非预期值 %zu；这可能是个 bug，请报告给我们"

#: xargs/xargs.c:1528
msgid "error waiting for child process"
msgstr "等待子进程时出错"

#: xargs/xargs.c:1561
#, c-format
msgid "WARNING: Lost track of %lu child processes"
msgstr "警告: 失去 %lu 子进程的踪迹"

#: xargs/xargs.c:1580
#, c-format
msgid "%s: exited with status 255; aborting"
msgstr "%s：以状态 255 退出；中止"

#: xargs/xargs.c:1583
#, c-format
msgid "%s: stopped by signal %d"
msgstr "%s：因信号 %d 而停止"

#: xargs/xargs.c:1586
#, c-format
msgid "%s: terminated by signal %d"
msgstr "%s：因信号 %d 而终止"

#: xargs/xargs.c:1671
#, fuzzy, c-format
msgid "%s: invalid number \"%s\" for -%c option\n"
msgstr "%s：选项 -%c 的数值无效\n"

#: xargs/xargs.c:1678
#, fuzzy, c-format
msgid "%s: value %s for -%c option should be >= %ld\n"
msgstr "%s: 选项 -%c 的值应当 >= %ld\n"

#: xargs/xargs.c:1687
#, fuzzy, c-format
msgid "%s: value %s for -%c option should be <= %ld\n"
msgstr "%s：选项 -%c 的值应当 <= %ld\n"

#: xargs/xargs.c:1707
#, c-format
msgid "Usage: %s [OPTION]... COMMAND [INITIAL-ARGS]...\n"
msgstr "用法：%s [选项]... 命令 [初始参数]...\n"

#: xargs/xargs.c:1712
msgid ""
"Run COMMAND with arguments INITIAL-ARGS and more arguments read from input.\n"
"\n"
msgstr "以所给<初始选项>和其它更多来自标准输入的参数运行指定<命令>。\n"

#: xargs/xargs.c:1714
msgid ""
"Mandatory and optional arguments to long options are also\n"
"mandatory or optional for the corresponding short option.\n"
msgstr "长选项的必需和可选参数对相应的短选项同样为必需或可选。\n"

#: xargs/xargs.c:1716
msgid ""
"  -0, --null                   items are separated by a null, not "
"whitespace;\n"
"                                 disables quote and backslash processing "
"and\n"
"                                 logical EOF processing\n"
msgstr ""
"  -0, --null                   各个项目由 null（空字符，不是空白字符）分"
"隔；\n"
"                                 同时停止对引用和反斜杠转义的处理及对逻辑 "
"EOF\n"
"                                 的处理\n"

#: xargs/xargs.c:1719
msgid ""
"  -a, --arg-file=FILE          read arguments from FILE, not standard input\n"
msgstr "  -a, --arg-file=文件          从指定<文件>读取参数，不使用标准输入\n"

#: xargs/xargs.c:1720
msgid ""
"  -d, --delimiter=CHARACTER    items in input stream are separated by "
"CHARACTER,\n"
"                                 not by whitespace; disables quote and "
"backslash\n"
"                                 processing and logical EOF processing\n"
msgstr ""
"  -d, --delimiter=分隔用字符   输入流的各个项目使用指定<分隔用字符>进行分"
"隔，\n"
"                                 不使用空白字符；同时停止对引用和反斜杠转义"
"的\n"
"                                 处理及对逻辑 EOF 的处理\n"

#: xargs/xargs.c:1723
msgid ""
"  -E END                       set logical EOF string; if END occurs as a "
"line\n"
"                                 of input, the rest of the input is ignored\n"
"                                 (ignored if -0 or -d was specified)\n"
msgstr ""
"  -E 终止符                    设置逻辑 EOF（逻辑文件末尾）字符串；如果<终止"
"符>\n"
"                                 作为单独一行输入，所有剩余的输入内容将被忽"
"略\n"
"                                 （若同时使用了 -0 或 -d 选项，则该选项失"
"效）\n"

#: xargs/xargs.c:1726
msgid ""
"  -e, --eof[=END]              equivalent to -E END if END is specified;\n"
"                                 otherwise, there is no end-of-file string\n"
msgstr ""
"  -e, --eof[=终止符]           在指定<终止符>的情况下与 -E <终止符> 等效；\n"
"                                 否则，视为文件末尾终止字符串不存在\n"

#: xargs/xargs.c:1728
msgid "  -I R                         same as --replace=R\n"
msgstr "  -I R                         和 --replace=R 相同\n"

#: xargs/xargs.c:1729
#, fuzzy
msgid ""
"  -i, --replace[=R]            replace R in INITIAL-ARGS with names read\n"
"                                 from standard input, split at newlines;\n"
"                                 if R is unspecified, assume {}\n"
msgstr ""
"  -i, --replace[=R]            将<初始参数>中的 R 替换为从标准输入读取的\n"
"                                 名称；如果未指定 R，则假定其为{}\n"

#: xargs/xargs.c:1732
msgid ""
"  -L, --max-lines=MAX-LINES    use at most MAX-LINES non-blank input lines "
"per\n"
"                                 command line\n"
msgstr ""
"  -L, --max-lines=最大行数     每个命令行使用最多<最大行数>行的非空输入行\n"

#: xargs/xargs.c:1734
msgid ""
"  -l[MAX-LINES]                similar to -L but defaults to at most one "
"non-\n"
"                                 blank input line if MAX-LINES is not "
"specified\n"
msgstr ""
"  -l[最大行数]                 类似 -L，但在没有给出<最大行数>信息时默认为接"
"受\n"
"                                 最多一行非空输入行\n"

#: xargs/xargs.c:1736
msgid ""
"  -n, --max-args=MAX-ARGS      use at most MAX-ARGS arguments per command "
"line\n"
msgstr "  -n, --max-args=最大参数数量  设置每个命令行可使用的<最大参数数量>\n"

#: xargs/xargs.c:1737
#, fuzzy
msgid ""
"  -o, --open-tty               Reopen stdin as /dev/tty in the child "
"process\n"
"                                 before executing the command; useful to run "
"an\n"
"                                 interactive application.\n"
msgstr ""
"  -0, --null                   各个项目由 null（空字符，不是空白字符）分"
"隔；\n"
"                                 同时停止对引用和反斜杠转义的处理及对逻辑 "
"EOF\n"
"                                 的处理\n"

#: xargs/xargs.c:1740
msgid ""
"  -P, --max-procs=MAX-PROCS    run at most MAX-PROCS processes at a time\n"
msgstr "  -P, --max-procs=MAX-PROCS    同时运行至多<MAX-PROCS>个进程\n"

#: xargs/xargs.c:1741
msgid "  -p, --interactive            prompt before running commands\n"
msgstr "  -p, --interactive            运行命令前提示\n"

#: xargs/xargs.c:1742
msgid ""
"      --process-slot-var=VAR   set environment variable VAR in child "
"processes\n"
msgstr "      --process-slot-var=VAR   在子进程中设置环境变量<VAR>\n"

#: xargs/xargs.c:1743
msgid ""
"  -r, --no-run-if-empty        if there are no arguments, then do not run "
"COMMAND;\n"
"                                 if this option is not given, COMMAND will "
"be\n"
"                                 run at least once\n"
msgstr ""
"  -r, --no-run-if-empty        如果没有指定任何参数，则不运行指定的<命令>；\n"
"                                 如果未给出该选项，指定的<命令>将至少运行一"
"次\n"

#: xargs/xargs.c:1746
msgid ""
"  -s, --max-chars=MAX-CHARS    limit length of command line to MAX-CHARS\n"
msgstr "  -s, --max-chars=最大字符数   限制命令行长度的<最大字符数>\n"

#: xargs/xargs.c:1747
msgid "      --show-limits            show limits on command-line length\n"
msgstr "      --show-limits            显示命令行长度的限制\n"

#: xargs/xargs.c:1748
msgid "  -t, --verbose                print commands before executing them\n"
msgstr "  -t, --verbose                执行命令前输出命令内容\n"

#: xargs/xargs.c:1749
msgid "  -x, --exit                   exit if the size (see -s) is exceeded\n"
msgstr "  -x, --exit                   如果大小（见 -s）超出限制则退出\n"

#, c-format
#~ msgid "cannot stat current directory"
#~ msgstr "无法 stat 当前目录"

#, c-format
#~ msgid "Cannot read list of mounted devices."
#~ msgstr "无法读取挂载设备列表。"

#, c-format
#~ msgid "WARNING: file system %s has recently been unmounted."
#~ msgstr "警告: 文件系统 %s 最近已被卸载过了。"

#, c-format
#~ msgid "WARNING: file system %s has recently been mounted."
#~ msgstr "警告: 文件系统 %s 最近已被挂载过了。"

#, c-format
#~ msgid ""
#~ "%s%s changed during execution of %s (old device number %ld, new device "
#~ "number %ld, file system type is %s) [ref %ld]"
#~ msgstr ""
#~ "%3$s 执行期间 %1$s%2$s 改变了(原来的设备号 %4$ld，新的设备号 %5$ld，文件系"
#~ "统类型 %6$s) [ref %7$ld]"

#, c-format
#~ msgid ""
#~ "%s%s changed during execution of %s (old inode number %<PRIuMAX>, new "
#~ "inode number %<PRIuMAX>, file system type is %s) [ref %ld]"
#~ msgstr ""
#~ "%3$s 执行期间 %1$s%2$s 改变了(原来的索引节点号 %4$<PRIuMAX>，新的索引节点"
#~ "号 %5$<PRIuMAX>，文件系统类型 %6$s) [ref %7$ld]"

#, c-format
#~ msgid "failed to return to parent directory"
#~ msgstr "无法回到上级目录"

#, c-format
#~ msgid "Failed to safely change directory into %s"
#~ msgstr "无法安全的更改目录至 %s"

#, c-format
#~ msgid ""
#~ "Filesystem loop detected; %s has the same device number and inode as a "
#~ "directory which is %d level higher in the file system hierarchy"
#~ msgid_plural ""
#~ "Filesystem loop detected; %s has the same device number and inode as a "
#~ "directory which is %d levels higher in the file system hierarchy"
#~ msgstr[0] ""
#~ "探测到文件系统循环；%s 拥有与文件系统体系中 %d 级深度的目录一样的设备号和"
#~ "索引节点"

#, c-format
#~ msgid "warning: not following the symbolic link %s"
#~ msgstr "警告: 符号链接 %s 无法检索"

#, c-format
#~ msgid ""
#~ "WARNING: Hard link count is wrong for %s (saw only st_nlink=%<PRIuMAX> "
#~ "but we already saw %<PRIuMAX> subdirectories): this may be a bug in your "
#~ "file system driver.  Automatically turning on find's -noleaf option.  "
#~ "Earlier results may have failed to include directories that should have "
#~ "been searched."
#~ msgstr ""
#~ "警告: %s 的硬链接数错误(仅查到 st_nlink=%<PRIuMAX> 但我们已经查到 "
#~ "%<PRIuMAX> 个子目录): 这可能是您文件系统驱动中的错误。find 的 -noleaf 选项"
#~ "是自动开启的。之前的查找结果可能无法包括应该已被找到的目录。"

#~ msgid ""
#~ "      -nouser -nogroup -path PATTERN -perm [-/]MODE -regex PATTERN\n"
#~ "      -readable -writable -executable\n"
#~ "      -wholename PATTERN -size N[bcwkMG] -true -type [bcdpflsD] -uid N\n"
#~ "      -used N -user NAME -xtype [bcdpfls]"
#~ msgstr ""
#~ "      -nouser -nogroup -path 匹配模式 -perm [-/]访问模式 -regex 匹配模式\n"
#~ "      -readable -writable -executable\n"
#~ "      -wholename 匹配模式 -size N[bcwkMG] -true -type [bcdpflsD] -uid N\n"
#~ "      -used N -user 用户名 -xtype [bcdpfls]"

#~ msgid "      -context CONTEXT\n"
#~ msgstr "      -context 文本\n"

#, c-format
#~ msgid ""
#~ "warning: Unix filenames usually don't contain slashes (though pathnames "
#~ "do).  That means that '%s %s' will probably evaluate to false all the "
#~ "time on this system.  You might find the '-wholename' test more useful, "
#~ "or perhaps '-samefile'.  Alternatively, if you are using GNU grep, you "
#~ "could use 'find ... -print0 | grep -FzZ %s'."
#~ msgstr ""
#~ "警告: Unix 文件名通常不包括 / 符号(但目录名中有这个符号)。这意味着‘%s "
#~ "%s’可能在此系统中永远等同于错误。您可能会发现‘-wholename’参数更有效，或者"
#~ "也许是‘-samefile’。又或者，如果您使用 GNU grep，您可使用‘find ... -print0 "
#~ "| grep -FzZ %s’。"

#, c-format
#~ msgid "] [path...] [expression]\n"
#~ msgstr "] [path...] [expression]\n"

#, c-format
#~ msgid "invalid argument %s for %s"
#~ msgstr "“%2$s”的参数 %1$s 无效"

#, c-format
#~ msgid "ambiguous argument %s for %s"
#~ msgstr "“%2$s”的参数 %1$s 有歧义"

#~ msgid "error closing file"
#~ msgstr "文件关闭错误"

#~ msgid "Unknown system error"
#~ msgstr "未知的系统错误"

#, c-format
#~ msgid "%s: option '%s' is ambiguous; possibilities:"
#~ msgstr "%s：选项“%s”有歧义；可能是："

#, c-format
#~ msgid "%s: option '--%s' doesn't allow an argument\n"
#~ msgstr "%s：选项“--%s”不接受参数\n"

#, c-format
#~ msgid "%s: option '%c%s' doesn't allow an argument\n"
#~ msgstr "%s：选项“%c%s”不接受参数\n"

#, c-format
#~ msgid "%s: option '--%s' requires an argument\n"
#~ msgstr "%s：选项“--%s”需要一个参数\n"

#, c-format
#~ msgid "%s: unrecognized option '--%s'\n"
#~ msgstr "%s：无法识别的选项“--%s”\n"

#, c-format
#~ msgid "%s: unrecognized option '%c%s'\n"
#~ msgstr "%s：无法识别的选项“%c%s”\n"

#, c-format
#~ msgid "%s: invalid option -- '%c'\n"
#~ msgstr "%s：无效选项 -- '%c'\n"

#, c-format
#~ msgid "%s: option requires an argument -- '%c'\n"
#~ msgstr "%s：选项需要一个参数 -- '%c'\n"

#, c-format
#~ msgid "%s: option '-W %s' is ambiguous\n"
#~ msgstr "%s：选项“-W %s”有歧义\n"

#, c-format
#~ msgid "%s: option '-W %s' doesn't allow an argument\n"
#~ msgstr "%s：选项“-W %s”不接受参数\n"

#, c-format
#~ msgid "%s: option '-W %s' requires an argument\n"
#~ msgstr "%s：选项“-W %s”需要一个参数\n"

#, c-format
#~ msgid "unable to record current working directory"
#~ msgstr "无法记录当前工作目录"

#, c-format
#~ msgid "failed to return to initial working directory"
#~ msgstr "返回到初始工作目录失败"

#~ msgid "`"
#~ msgstr "“"

#~ msgid "'"
#~ msgstr "”"

#~ msgid "^[yY]"
#~ msgstr "^[yY]"

#~ msgid "^[nN]"
#~ msgstr "^[nN]"

#, c-format
#~ msgid "Packaged by %s (%s)\n"
#~ msgstr "由 %s（%s）打包\n"

#, c-format
#~ msgid "Packaged by %s\n"
#~ msgstr "由 %s 打包\n"

#~ msgid "(C)"
#~ msgstr "©"

#~ msgid ""
#~ "\n"
#~ "License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
#~ "html>.\n"
#~ "This is free software: you are free to change and redistribute it.\n"
#~ "There is NO WARRANTY, to the extent permitted by law.\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "许可证 GPLv3+：GNU 通用公共许可证第 3 版或更新版本<https://gnu.org/"
#~ "licenses/gpl.html>。\n"
#~ "本软件是自由软件：您可以自由修改和重新发布它。\n"
#~ "在法律范围内没有其他保证。\n"
#~ "\n"

#, c-format
#~ msgid "Written by %s.\n"
#~ msgstr "由 %s 编写。\n"

#, c-format
#~ msgid "Written by %s and %s.\n"
#~ msgstr "由 %s 和 %s 编写。\n"

#, c-format
#~ msgid "Written by %s, %s, and %s.\n"
#~ msgstr "由 %s、%s 和 %s 编写。\n"

#, c-format
#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s 和\n"
#~ "%s 编写。\n"

#, c-format
#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s 和 %s 编写。\n"

#, c-format
#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s、%s 和 %s 编写。\n"

#, c-format
#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, %s, and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s、%s、%s 和 %s 编写。\n"

#, c-format
#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, %s, %s,\n"
#~ "and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s、%s、%s、%s 和\n"
#~ "%s 编写。\n"

#, c-format
#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, %s, %s,\n"
#~ "%s, and %s.\n"
#~ msgstr ""
#~ "由%s、%s、%s、\n"
#~ "%s、%s、%s、%s、\n"
#~ "%s 和 %s 编写。\n"

#, c-format
#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, %s, %s,\n"
#~ "%s, %s, and others.\n"
#~ msgstr ""
#~ "由%s、%s、%s、\n"
#~ "%s、%s、%s、%s、\n"
#~ "%s、%s 和其他人编写。\n"

#, c-format
#~ msgid ""
#~ "\n"
#~ "Report bugs to: %s\n"
#~ msgstr ""
#~ "\n"
#~ "请向 <%s> 报告软件错误。请向 <i18n-zh@googlegroups.com> 报告翻译错误。\n"

#, c-format
#~ msgid "Report %s bugs to: %s\n"
#~ msgstr "请向 %2$s 报告 %1$s 的错误\n"

#, c-format
#~ msgid "%s home page: <%s>\n"
#~ msgstr "%s 的主页：<%s>\n"

#, c-format
#~ msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
#~ msgstr "%s 项目主页：<https://www.gnu.org/software/%s/>\n"

#~ msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
#~ msgstr "GNU 软件一般性帮助：<https://www.gnu.org/gethelp/>\n"

#~ msgid "memory exhausted"
#~ msgstr "内存耗尽"

#, c-format
#~ msgid "invalid %s%s argument '%s'"
#~ msgstr "无效的 %s%s 的参数“%s”"

#, c-format
#~ msgid "invalid suffix in %s%s argument '%s'"
#~ msgstr "%s%s 的参数“%s”有无效后缀"

#, c-format
#~ msgid "%s%s argument '%s' too large"
#~ msgstr "%s%s 的参数“%s”过长"

#, c-format
#~ msgid ""
#~ "Usage: %s [--version | --help]\n"
#~ "or     %s most_common_bigrams < file-list > locate-database\n"
#~ msgstr ""
#~ "用法: %s [--version | --help]\n"
#~ "or     %s most_common_bigrams < file-list > locate-database\n"

#~ msgid ""
#~ "\n"
#~ "Report bugs to <bug-findutils@gnu.org>.\n"
#~ msgstr ""
#~ "\n"
#~ "将错误报告发送到 <bug-findutils@gnu.org>。\n"

#, c-format
#~ msgid ""
#~ "%s is an slocate database.  Support for these is new, expect problems for "
#~ "now."
#~ msgstr ""
#~ "%s 是一个 slocate 数据库。这些支持都是新开发的，目前希望能提交错误报告。"

#, c-format
#~ msgid "unable to allocate memory"
#~ msgstr "无法分配内存"

#~ msgid "Mode %s is not valid when POSIXLY_CORRECT is on."
#~ msgstr "当开启 POSIXLY_CORRECT 时模式 %s 无效。"

#~ msgid ""
#~ "\n"
#~ "Mandatory arguments to long options are mandatory for short options too.\n"
#~ "Non-mandatory arguments are indicated by [square brackets]\n"
#~ "  -0, --null                   Items are separated by a null, not "
#~ "whitespace.\n"
#~ "                               Disables quote and backslash processing\n"
#~ "  -a, --arg-file=FILE          Read arguments from FILE, not standard "
#~ "input\n"
#~ "  -d, --delimiter=CHARACTER    Input items are separated by CHARACTER, "
#~ "not by\n"
#~ "                               blank space. Disables quote and backslash\n"
#~ "                               processing\n"
#~ "  -E END                       If END occurs as a line of input, the rest "
#~ "of\n"
#~ "                               the input is ignored.\n"
#~ "  -e [END], --eof[=END]        Equivalent to -E END if END is specified.\n"
#~ "                               Otherwise, there is no end-of-file string\n"
#~ "  --help                       Print a summary of the options to xargs.\n"
#~ "  -I R                         same as --replace=R (R must be specified)\n"
#~ "  -i,--replace=[R]             Replace R in initial arguments with names\n"
#~ "                               read from standard input. If R is\n"
#~ "                               unspecified, assume {}\n"
#~ "  -L,-l, --max-lines=MAX-LINES Use at most MAX-LINES nonblank input lines "
#~ "per\n"
#~ "                               command line\n"
#~ "  -l                           Use at most one nonblank input line per\n"
#~ "                               command line\n"
#~ "  -n, --max-args=MAX-ARGS      Use at most MAX-ARGS arguments per "
#~ "command\n"
#~ "                               line\n"
#~ "  -P, --max-procs=MAX-PROCS    Run up to max-procs processes at a time\n"
#~ "  -p, --interactive            Prompt before running commands\n"
#~ "  --process-slot-var=VAR       Set environment variable VAR in child\n"
#~ "                               processes\n"
#~ "  -r, --no-run-if-empty        If there are no arguments, run no "
#~ "command.\n"
#~ "                               If this option is not given, COMMAND will "
#~ "be\n"
#~ "                               run at least once.\n"
#~ "  -s, --max-chars=MAX-CHARS    Limit commands to MAX-CHARS at most\n"
#~ "  --show-limits                Show limits on command-line length.\n"
#~ "  -t, --verbose                Print commands before executing them\n"
#~ "  --version                    Print the version number\n"
#~ "  -x, --exit                   Exit if the size (see -s) is exceeded\n"
#~ msgstr ""
#~ "\n"
#~ "选项完整形式可用的参数也适用于其缩写形式。\n"
#~ "可选参数被一对方括号括起\"[参数]\"\n"
#~ "  -0, --null                   条目以 null分隔，而非空格。\n"
#~ "                               不处理引号和反斜杠\n"
#~ "  -a, --arg-file=FILE          从 FILE中获取参数，而非标准输入\n"
#~ "  -d, --delimiter=CHARACTER    输入项由 CHARACTER分隔，而非空格。\n"
#~ "                               不处理引号反斜杠\n"
#~ "\n"
#~ "  -E END                       若以 END作为一行输入的结尾，余下输入均忽"
#~ "略。\n"
#~ "                    \n"
#~ "  -e [END], --eof[=END]        若指定 END，则等同于 -E END。\n"
#~ "                               否则无文件结尾字串。\n"
#~ "  --help                       打印 xargs选项的帮助说明。\n"
#~ "  -I R                         等同于 --replace=R (R 必须指定)\n"
#~ "  -i,--replace=[R]             以标准输入所读取的名字代替起始参数中的 "
#~ "R。\n"
#~ "                               若未定义 R，则假定{}\n"
#~ "\n"
#~ "  -L,-l, --max-lines=MAX-LINES 每行命令最多用 MAX-LINES个非空输入\n"
#~ "\n"
#~ "  -l                           每行命令最多用一个非空输入\n"
#~ "\n"
#~ "  -n, --max-args=MAX-ARGS      每行命令最多用 MAX-ARGS个参数\n"
#~ "\n"
#~ "  -P, --max-procs=MAX-PROCS    一次最多运行 MAX-PROCS个进程\n"
#~ "  -p, --interactive            交互式运行命令\n"
#~ "  --process-slot-var=VAR       在子进程中设置环境变量 VAR。\n"
#~ "\n"
#~ "  -r, --no-run-if-empty        若无参数则不运行命令。\n"
#~ "                               若不指定此选项，COMMAND 将至少运行一次。\n"
#~ "\n"
#~ "  -s, --max-chars=MAX-CHARS    最多 MAX-CHARS条命令\n"
#~ "  --show-limits                在命令行中显示限制。\n"
#~ "  -t, --verbose                在运行命令前打印\n"
#~ "  --version                    打印版本号\n"
#~ "  -x, --exit                   若超出 size(参看 -s)则退出\n"

#~ msgid "cannot get current directory"
#~ msgstr "无法获取当前目录"

#~ msgid "Built using GNU gnulib version %s\n"
#~ msgstr "以 GNU gnulib 版本 %s 构建\n"

#~ msgid ""
#~ "Usage: %s [-0prtx] [--interactive] [--null] [-d|--delimiter=delim]\n"
#~ "       [-E eof-str] [-e[eof-str]]  [--eof[=eof-str]]\n"
#~ "       [-L max-lines] [-l[max-lines]] [--max-lines[=max-lines]]\n"
#~ "       [-I replace-str] [-i[replace-str]] [--replace[=replace-str]]\n"
#~ "       [-n max-args] [--max-args=max-args]\n"
#~ "       [-s max-chars] [--max-chars=max-chars]\n"
#~ "       [-P max-procs]  [--max-procs=max-procs] [--show-limits]\n"
#~ "       [--verbose] [--exit] [--no-run-if-empty] [--arg-file=file]\n"
#~ "       [--version] [--help] [command [initial-arguments]]\n"
#~ msgstr ""
#~ "用法: %s [-0prtx] [--interactive] [--null] [-d|--delimiter=delim]\n"
#~ "       [-E eof-str] [-e[eof-str]]  [--eof[=eof-str]]\n"
#~ "       [-L max-lines] [-l[max-lines]] [--max-lines[=max-lines]]\n"
#~ "       [-I replace-str] [-i[replace-str]] [--replace[=replace-str]]\n"
#~ "       [-n max-args] [--max-args=max-args]\n"
#~ "       [-s max-chars] [--max-chars=max-chars]\n"
#~ "       [-P max-procs]  [--max-procs=max-procs] [--show-limits]\n"
#~ "       [--verbose] [--exit] [--no-run-if-empty] [--arg-file=file]\n"
#~ "       [--version] [--help] [command [initial-arguments]]\n"

#~ msgid "%s: illegal option -- %c\n"
#~ msgstr "%s：非法选项 -- %c\n"

#~ msgid "Success"
#~ msgstr "成功"

#~ msgid "No match"
#~ msgstr "没有匹配"

#~ msgid "Invalid collation character"
#~ msgstr "无效的校勘字符"

#~ msgid "Invalid character class name"
#~ msgstr "无效的字符类名"

#~ msgid "Trailing backslash"
#~ msgstr "末尾的反斜线"

#~ msgid "Invalid back reference"
#~ msgstr "无效的向后引用"

#~ msgid "Unmatched [ or [^"
#~ msgstr "不匹配的 [ 或 [^"

#~ msgid "Unmatched ( or \\("
#~ msgstr "不匹配的 ( 或 \\("

#~ msgid "Unmatched \\{"
#~ msgstr "不匹配的 \\{"

#~ msgid "Invalid content of \\{\\}"
#~ msgstr "无效的 \\{\\} 的内容"

#~ msgid "Invalid range end"
#~ msgstr "无效的结束范围"

#~ msgid "Memory exhausted"
#~ msgstr "内存耗尽"

#, fuzzy
#~ msgid "Invalid preceding regular expression"
#~ msgstr "无效正则表达式前缀"

#~ msgid "Premature end of regular expression"
#~ msgstr "正则表达式急于结束"

#~ msgid "Regular expression too big"
#~ msgstr "常规表达式过大"

#~ msgid "Unmatched ) or \\)"
#~ msgstr "不匹配的 ) 或 \\)"

#~ msgid "No previous regular expression"
#~ msgstr "没有上一个常规表达式"