#!/bin/sh
# dxf.test
#
# Copyright (C) 2018-2023 Free Software Foundation, Inc.
#
# This program is free software, licensed under the terms of the GNU
# General Public License as published by the Free Software Foundation,
# either version 3 of the License, or (at your option) any later version.
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#
# test DXF specific content
# Author: Reini Urban

[ -z "$DATADIR" ] && DATADIR="@top_srcdir@/test/test-data"
top_builddir="@top_builddir@"
EXEEXT="@EXEEXT@"
DEBUG_CLASSES="@DEBUG_CLASSES@"
TESTS_ENVIRONMENT="@AM_TESTS_ENVIRONMENT@"
if [ -n "$VALGRIND" ] && [ -n "$LOG_COMPILER" ]; then
    TESTPROG="$LOG_COMPILER $LOG_FLAGS"
elif [ -n "@WINE@" ]; then
    TESTPROG="@WINE@"
elif [ -n "$TESTS_ENVIRONMENT" ]; then
    TESTPROG="$TESTS_ENVIRONMENT @LTEXEC@"
else
    TESTPROG="@LTEXEC@"
fi
# shellcheck disable=SC2157
if [ -n "@HAVE_ASAN@" ]
then
    DXF2DWG="env ASAN_OPTIONS=detect_leaks=0 $TESTPROG ./dxf2dwg${EXEEXT}"
else    
    DXF2DWG="$TESTPROG ./dxf2dwg${EXEEXT}"
fi

i=0
rm -f ./*dxf.log
is_release="$(grep -c 'IS_RELEASE 1' $top_builddir/src/config.h)"

check_subentity() {
    if [ -f "$dwg" ] && [ -f "$dxf" ]; then
        $TESTPROG "./dwg2dxf${EXEEXT}" -y -v4 -o "$tgt" "$dwg" 2>/dev/null
        grep -A8 ^VERTEX "$dxf" >tmp1
        grep -A8 ^VERTEX "$tgt" >tmp2
        d="$(diff -b -U1 tmp1 tmp2)"
        test -z "$d" || echo "VERTEX $tgt $d"
        grep -A8 ^SEQEND "$dxf" >tmp1
        grep -A8 ^SEQEND "$tgt" >tmp2
        d="$(diff -b -U1 tmp1 tmp2)"
        test -z "$d" || echo "SEQEND $tgt $d"
        grep -A8 ^POLYLINE "$dxf" >tmp1
        grep -A8 ^POLYLINE "$tgt" >tmp2
        d="$(diff -b -U1 tmp1 tmp2)"
        test -z "$d" || echo "POLYLINE $tgt $d"
        rm tmp1 tmp2
#   else
#       echo skip $dxf missing
    fi
}

# check subentity owners
for year in r14 2000 2004 2007 2010 2013 2018
do
    for base in PolyLine3D PolyLine2D
    do
        dwg="$DATADIR/${year}/${base}.dwg"
        dxf="$DATADIR/${year}/${base}.dxf"
        tgt="../${base}_${year}.dxf"
        check_subentity
    done
done
for year in r14 2000 2004 2007 2010 2013 2018
do
    for base in example Drawing
    do
        dwg="$DATADIR/${base}_${year}.dwg"
        dxf="$DATADIR/${base}_${year}.dxf"
        tgt="../${base}_${year}.dxf"
        check_subentity
    done
done

check_acdb_dxfname() {
    if [ -f "$dwg" ] && [ -f "$dxf" ]; then
        $TESTPROG "./dwg2dxf${EXEEXT}" -y -v0 -o "$tgt" "$dwg" 2>/dev/null >/dev/null
        expect="$(grep -c "^$dxfname" "$dxf")"
        if [ -n "$1" ]; then expect="$1"; fi
        got=$(grep -c "^$dxfname" "$tgt")
        if [ "$got" = "$expect" ]
        then
            echo "$tgt $dxfname ok"
        else
            echo "$tgt $dxfname fail: got $got != expect $expect"
            i=$((i+1))
            grep -2 "^$dxfname" "$tgt" >"$log"
        fi
    fi
}

# check handled ACDB* dxfname's
# UNHANDLED: ACDBDETAILVIEWSTYLE ACDBSECTIONVIEWSTYLE
for dwg in "$DATADIR"/sample_2*.dwg; do
    dxf="$(echo "$dwg" | sed 's,.dwg,.dxf,')"
    tgt="../$(basename "$dxf")"
    log="$(basename "$tgt").log"
    rm "./$log" 2>/dev/null
    for dxfname in ACDBDICTIONARYWDFLT ACDBPLACEHOLDER LAYOUT
    do
        check_acdb_dxfname
    done
done

# Note that UNSTABLE classes are now skipped, just the single CLASS entry
for dwg in "$DATADIR"/example_*.dwg
do
    test -L "$dwg" && break
    dxf="$(echo "$dwg" | sed 's,.dwg,.dxf,')"
    tgt="../$(basename "$dxf")"
    log="$(basename "$tgt").log"
    rm "./$log" 2>/dev/null
    for dxfname in ACDBPERSSUBENTMANAGER ACDBASSOCDEPENDENCY
    do
        if [ "$DEBUG_CLASSES" = "1" ]; then
            check_acdb_dxfname
        else
            check_acdb_dxfname 1
        fi
    done
done

# shellcheck disable=SC2043
for dwg in "$DATADIR"/2004/Underlay.dwg
do
    dxf="$(echo "$dwg" | sed 's,.dwg,.dxf,')"
    tgt="../$(basename "$dxf" .dxf)_2004.dxf"
    log="$(basename "$tgt").log"
    rm "./$log" 2>/dev/null
    for dxfname in PDFDEFINITION PDFUNDERLAY
    do
        check_acdb_dxfname
    done
done

# check vertex - seqend order
check_pline_order() {
    if [ -f "$dwg" ] && [ -f "$dxf" ]; then
        $TESTPROG "./dwg2dxf${EXEEXT}" -y -v0 -o "$tgt" "$dwg" 2>/dev/null >/dev/null
        got="$(grep -E '^(POLYLINE|VERTEX|SEQEND)' "$tgt")"
        expect="$(grep -E '^(POLYLINE|VERTEX|SEQEND)' "$dxf")"
        if [ "$got" = "$expect" ]
        then
            echo "$tgt" pline order ok
        else
            echo "$tgt" pline order fail: "$got"
            i=$((i+1))
            echo "expect=$expect" >"$log"
            echo "got=$got" >>"$log"
        fi
    fi
}
# check insert - attrib - seqend order
check_insert_order() {
    if [ -f "$dwg" ] && [ -f "$dxf" ]; then
        $TESTPROG "./dwg2dxf${EXEEXT}" -y -v0 -o "$tgt" "$dwg" 2>/dev/null >/dev/null
        got="$(grep -E '^(INSERT|ATTRIB|SEQEND)' "$tgt")"
        expect="$(grep -E '^(INSERT|ATTRIB|SEQEND)' "$dxf")"
        if [ "$got" = "$expect" ]
        then
            echo "$tgt" insert order ok
        else
            echo "$tgt" insert order fail: "$got"
            i=$((i+1))
            echo "expect=$expect" >"$log"
            echo "got=$got" >>"$log"
        fi
    fi
}

check_roundtrip() {
    if [ -f "$dwg" ] && [ -x dxf2dwg ]
    then
        dxf="$(basename "$dwg" .dwg).dxf"
        tgt="$(basename "$dwg")"
        log1="$(basename "$dwg" .dwg).log1"
        log2="$(basename "$dwg" .dwg).log2"
        if ! $TESTPROG "./dwg2dxf${EXEEXT}" -y -v2 -o "$dxf" "$dwg" 2>"$log1" >/dev/null; then
            echo "dwg2dxf $dwg failed"
            exit 1
        fi
        if ! $DXF2DWG -y -v0 -o "$tgt" "$dxf" 2>/dev/null >/dev/null; then
            echo "$DXF2DWG -y -v0 -o $tgt $dxf failed"
            exit 1
        fi
        if ! $TESTPROG "./dwgread${EXEEXT}" -v2 "$tgt" 2>"$log2" >/dev/null; then
            echo "dwgread $tgt failed"
            exit 1
        fi
        # We dont write unstable entities yet. WIPEOUT is converted to POINT in encode, but skipped at out_dxf
        if [ "$DEBUG_CLASSES" = "1" ] && [ -z "$is_release" ]; then
            expect="$(grep -E '^Add entity' "$log1" | grep -c -v 'entity UNKNOWN_ENT')"
        else
            expect="$(grep -E '^Add entity' "$log1" | grep -E -c -v 'entity (WIPEOUT|ARC_DIMENSION|HELIX|UNKNOWN_ENT)')"
        fi
        got="$(grep -E -c '^Add entity' "$log2")"
        rm "./$dxf" "./$tgt" 2>/dev/null
        if [ "$got" -ge "$expect" ]
        then
            echo "$dxf" roundtrip ok
            rm "$log1" "$log2" 2>/dev/null
        else
            echo "$dxf" "roundtrip fail: expect $expect, got $got entities"
            i=$((i+1))
            echo "expect=$expect" >"$log"
            echo "got=$got" >>"$log"
            # shellcheck disable=SC2016
            @PERL@ -nle'/^Add entity (\w+) / && print $1' "$log1" >"$log1".tmp
            # shellcheck disable=SC2016
            @PERL@ -nle'/^Add entity (\w+) / && print $1' "$log2" >"$log2".tmp
            diff -b -U0 "$log1".tmp "$log2".tmp | grep -v '^@@' | tee "$log"
            rm "$log1".tmp "$log2".tmp 2>/dev/null
        fi
    fi
}

for year in 2007 2018
do
    base=PolyLine3D
    dwg="$DATADIR/${year}/${base}.dwg"
    dxf="$DATADIR/2013/${base}.dxf"
    tgt="../${base}_${year}.dxf"
    log="$(basename "$tgt" .dxf)_pline.dxf.log"
    rm "./$log" 2>/dev/null
    check_pline_order
done

for year in 2000 2004 2007 2010 2013 2018
do
    base=example
    dwg="$DATADIR/${base}_${year}.dwg"
    dxf="$DATADIR/${base}_${year}.dxf"
    tgt="../${base}_${year}.dxf"
    log="$(basename "$tgt" .dxf)_pline.dxf.log"
    rm "./$log" 2>/dev/null
    check_pline_order
done

for year in 2000 2004 2007 2010 2013 2018
do
    base=example
    dwg="$DATADIR/${base}_${year}.dwg"
    dxf="$DATADIR/${base}_${year}.dxf"
    tgt="../${base}_${year}.dxf"
    log="$(basename "$tgt" .dxf)_insert.dxf.log"
    rm "./$log" 2>/dev/null
    check_insert_order
done

# r14 fails on MINSERT
for year in 2000 2004 2007 2010 2013 2018 r13 # r14
do
    base=example
    dwg="$DATADIR/${base}_${year}.dwg"
    tgt="../${base}_${year}"
    log="$tgt.dxf.log"
    rm "./$log" 2>/dev/null
    check_roundtrip
done
#for d in r11/ACEB10 r11/entities-2d r10/entities r9/entities r2.10/entities \
#         r2.6/entities r1.4/entities
#do
#    base="$(basename $d)"
#    year="$(dirname $d)"
#    dwg="$DATADIR/$d.dwg"
#    tgt="../${base}_${year}"
#    log="$tgt.dxf.log"
#    rm "./$log" 2>/dev/null
#    check_roundtrip
#done

if test "0" = "$i" ; then
    rm ./*.dxf.log 2>/dev/null
    exit 0
else
    echo "$(basename "$0"): $i failures"
    ls -l ./*dxf.log
    exit 1
fi